ASTM E478-24 PDF

ASTM E478-24 PDF

Standard Test Methods for Chemical Analysis of Copper Alloys

$52.00 $104.00 -50%
Product Code: ASTM E478
Stock In Stock
Published: 2024
Number of Pages: 22

Available Options

Product Description

Significance and Use
 4.1  These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with composition specifications. It is assumed that all who use these methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.
 Scope
 1.1  These test methods cover the chemical analysis of copper alloys having chemical ranges within the following limits: 2
  Element
 Composition, %
 Aluminum
 12.0 max
 Antimony
  1.0 max
 Arsenic
  1.0 max
 Cadmium
  1.5 max
 Cobalt
  1.0 max
 Copper
 40.0 min
 Iron
  6.0 max
 Lead
 27.0 max
 Manganese
  6.0 max
 Nickel
 50.0 max
 Phosphorus
  1.0 max
 Silicon
  5.0 max
 Sulfur
  0.1 max
 Tin
 20.0 max
 Zinc
 50.0 max
 1.2  The test methods appear in the following sections:
 Sections
 Aluminum by the Carbamate Extraction-(Ethyl- enedinitrilo) Tetraacetic Acid Disodium Salt (EDTA) Titrimetric Test Method [2 % to 12 %]
 71 – 78
 Copper by the Combined Electrodeposition Gravimetric and Oxalyldihydrazide Spectrophotometric Test Method [50 %, minimum]
 10 – 18
 Iron by the 1,10-Phenanthroline Spectrophotometric Test Method [0.003 % to 1.25 %]
 19 – 28
 Lead by Atomic Absorption Spectrometry [0.002 % to 15 %]
 90 – 100
 Lead by the (Ethylenedinitrilo) Tetraacetic Acid, Disodium Salt (EDTA) Titrimetric Test Method [2.0 % to 30.0 %]
 29 – 36
 Nickel by the Dimethylglyoxime Extraction Spectrophotometric Test Method [0.03 % to 5.0 %]
 37 – 46
 Nickel by the Dimethylglyoxime Gravimetric Test Method [4 % to 50 %]
 55 – 62
 Silver in Silver-Bearing Copper by Atomic Absorption Spectrometry [0.01 % to 0.12 %]
 101 – 112
 Tin by the Iodometric Titration Test Method [0.5 % to 20 %]
 63 – 70
 Tin by the Phenylfluorone Spectrophotometric Test Method [0.01 % to 1.0 %]
 113 – 123
 Zinc by Atomic Absorption Spectrometry [0.02 % to 2 %]
 79 – 89
 Zinc by the (Ethylenedinitrilo) Tetraacetic Acid Disodium Salt (EDTA) Titrimetric Test Method [2 % to 40 %]
 47 – 54
 1.3  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
 1.4   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.5   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM E478-24 PDF

ASTM E478-24 PDF

$52.00 $104.00