ASTM F887-23 PDF

ASTM F887-23 PDF

Standard Specifications for Personal Climbing Equipment

$52.00 $104.00 -50%
Product Code: ASTM F887
Stock In Stock
Published: 2023
Number of Pages: 34

Available Options

Product Description

Scope
 Table of Contents
 Section Title
 Section/Paragraph
  Scope
 1
  Referenced Documents
 2
  Terminology
 3
  Significance and Use
 4
 Pole and Tree Climbers
  Classification
 5
  Ordering Information
 6
  Pole and Tree Climbers
 7
  Climber Gaffs
 8
  Climber Straps
 9
  Climber Pads
 10
  Climber Footplates
 11
 Body Belts, Positioning Devices and Wood Pole Fall Restriction Devices (WPFRD)
  Classification
 12
  Ordering Information
 13
  Two Dee Body Belts, Auxiliary Positioning Belts, and Four Dee Body Belts
 14
  Two Dee Body Belts
 14.1
  Auxiliary Positioning Belts and Four Dee Body Belts
 14.2
  Positioning Devices
 15
  Wood Pole Fall Restriction Device (WPFRD)
 16
  Arborist Saddle 
 17
 Harnesses
  Classification
 18
  Ordering Information
 18.2
  Sizing
 18.3
  Marking
 18.4
 Energy Absorbing Lanyards
  Classification
 19
  Ordering Information
 20
  Energy Absorbing Lanyards
 21
 Qualification Testing
  After Exposure to an Electric Arc
 22
  Hardware Requirements
 23
  Test Equipment
 24
  Qualification Testing
 25
  Body Belts, Four Dee Body Belts, and Auxiliary Positioning Belts
 25.1
  Positioning Devices
 25.2
  WPFRD
 25.3
  Arborist Saddle
 25.4
  Harness
 25.5
  Energy Absorbers
 25.6
  Instructions
 26
  Guarantee and Rejection
 27
  Keywords
 28
 1.1  This standard covers the specifications and qualification testing of the following:
 Climbers,
 Climber straps,
 Climber Pads,
 Climber Footplates,
 Body Belts,
 Work Positioning Devices with Locking Snaphooks/Carabiners,
 Wood Pole Fall Restriction Devices (WPFRD),
 Arborist Saddle,
 Harnesses,
 Energy Absorbing Lanyards.
 These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame.
 1.2  Equipment may fall within one of the following categories:
 1.2.1   Fall (Travel) Restraint— Prevents a user from reaching a fall hazard (allow 0 fall distance).
 1.2.2   Work Positioning— Allows a 2 ft maximum free fall distance.
 1.2.3   Fall Arrest— Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb.
 Note 1:   Under certain conditions and with the use of equipment designed for such conditions, a 12-ft free-fall distance with a maximum arrest force of 1800 lb is allowed.
 1.2.4   Suspension— Allows 0 free-fall distance while supporting the user’s weight.
 1.2.5   Fall Restriction— to prevent or limit free fall from a work position or while ascending/descending a wood pole.
 1.3  Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered.
 1.4  Two types of body belts, (Types A and B) are covered.
 1.5  Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards, (Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered.
 1.6  Two types of WPFRD, (Types A and AB) are covered.
 1.7  Arborist saddle, (Type A) Work Positioning and Suspension are covered.
 1.8  Two types of harnesses, (Types A and B) are covered.
 1.9  Two types of energy absorbing lanyards, (Types A and B) are covered.
 1.10  The values stated in United States customary units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
 1.11   The following safety hazards caveat pertains only to the test method portions, 9.2 , 10.3 , 11.2 , 14.1.4 , 15.3 , 15.4 , 16.2 , 17.2 , 18.4 , 21.2 , 22 , 23 , and 25 of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
 1.12   This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ASTM F887-23 PDF

ASTM F887-23 PDF

$52.00 $104.00