AWS D9.1/D9.1M-2026 PDF

AWS D9.1/D9.1M-2026 PDF

Sheet Metal Welding Code

$54.00 $108.00 -50%
Product Code: AWS D9.1/D9.1M
Stock In Stock
Edition: 8.
Published: 2026
Number of Pages: 86
File Size: 1 file, 2.3 MB

Available Options

Product Description

This code provides qualification, workmanship, and inspection requirements for both arc welding (Part A) and braze welding (Part B), as they apply to the fabrication, manufacture, and erection of nonstructural sheet metal components and systems. This code was developed to provide standardized requirements for the qualification, production, and acceptance of welding or braze welding of nonstructural sheet metal components. General applications of this code are in the following industrial areas: (1) Heating, ventilating, and air conditioning systems (2) Food processing equipment (3) Architectural sheet metal and similar applications (4) Other nonstructural sheet metal applications This code covers sheet metal thicknesses up to and including 3 gauge or 0.250 in [6.4 mm]. Also covered are the attachment of accessories and components of the system, and joining or attachment of any member whose sole purpose is stiffening, supporting, or reinforcing the sheet metal and non-structural welding of material thicknesses up to and including 0.500 in [12.7 mm]. When welding any support to itself or to structural components, such as building steel, the welding shall be performed in accordance with the appropriate structural code(s). Limitations/Exceptions. This code is not intended to apply: (1) Where negative pressure or positive pressure exceeds 5 psi [30 kPa], which is approximately 120 in [3 m] of standing water. (2) Where structural requirements apply (Note: AWS D1.3/D1.3M, Structural Welding Code—Sheet Steel is intended for such applications). (3) Where sheet metal products related to automotive applications are concerned. (4) Where brazing qualifications are specified to be in accordance with AWS B2.2/B2.2M, Specification for Brazing Procedure and Performance Qualification. (5) Where soldering qualifications are specified to be in accordance with AWS B2.3/B2.3M, Specification for Soldering Procedure and Performance Qualification. This code requires values to be specified by the Engineer for weld type, size, and location of the application. See subclauses 8.4.2, 8.4.3, 8.4.4, 13.4.2, and 13.4.3. Symbols used in this code shall be in accordance with the latest edition of AWS A2.4, Standard Symbols for Welding, Brazing, and Nondestructive Examination.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
AWS D9.1/D9.1M-2026 PDF

AWS D9.1/D9.1M-2026 PDF

$54.00 $108.00