AWS C3.15M/C3.15-2026 PDF

AWS C3.15M/C3.15-2026 PDF

Standard Methods for Evaluating the Strength of Soldered Joints

$46.00 $92.00 -50%
Product Code: AWS C3.15M/C3.15
Stock In Stock
Edition: 1.
Published: 2026
Number of Pages: 88
File Size: 1 file, 6 MB

Available Options

Product Description

The purpose of this document is to standardize the methods used to obtain reproducible strength data on soldered joints. Requirements are made with respect to base materials—metal alloy and ceramic; test specimen geometries; soldered joint clearance; test specimen fabrication processes; mechanical testing procedures; as well as data reporting and failure analysis. The standardization of these requirements will allow for the comparison of soldered joint strength data between different testing sources. The objective of this specification is to describe those standard requirements for design, process, reliability, and test engineers and operators. The user will note that specific base material metal (alloy) and ceramic compositions are specified for the test specimens. This requirement was introduced, once again, with the objective of standardizing the mechanical test data. However, applications may arise whereby the user would deviate from these base material requirements in order to measure the effects on soldered joint mechanical strength caused by the combined effects of temperature cycling and dissimilar coefficients of thermal expansion (CTEs) between base materials or between the base materials and the soldering filler metal. Test documentation should reflect these deviations. Printed Circuit Board Soldered Joints. This specification does not address the mechanical testing of soldered joints used on printed circuit boards (PCBs). The omission of this topic does not imply that the mechanical properties of PCB soldered interconnections are of lesser importance in soldering technology. Rather, addressing this specific category of soldered joints would require a separate set of requirements to address the sheer breadth of materials and design configurations that are used on PCBs. Such an effort was beyond the scope of this document. Nevertheless, the test procedures and analysis techniques, which are discussed in the following paragraphs, could be applied to the development of mechanical tests for PCB soldered joints. Computational Modeling. Lastly, the level of rigor underlying the requirements in this specification will result in property data with sufficient fidelity to validate computational model predictions. Control Documents. Control documents shall have the following order of authority from highest to lowest: instructions from the Organization Having Quality Responsibility (OHQR), assembly drawings, contract or purchase order contents, and this specification. The OHQR shall have the authority to make any modifications to the requirements in this document or other control document(s) and the responsibility to communicate those modifications to the relevant engineer(s), operator(s), or both. Any and all modifications to control documents shall be fully documented by the OHQR.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
AWS C3.15M/C3.15-2026 PDF

AWS C3.15M/C3.15-2026 PDF

$46.00 $92.00