ANSI/AWWA C500 describes iron-body, metal-to-metal seated gate valves for water supply service: nonrising-stem valves, including tapping gate valves, from 3 in. through 72 in., and outside screw and yoke rising-stem valves from 3 in. through 72 in., with double-disc gates having parallel or inclined seats or with solid-wedge gates. Valves are intended for approximately level settings where flow velocity does not exceed 16 ft/sec (4.9 m/sec) in the fully open position. Minimum design working pressure is 200 psig (1,379 kPa) for 12-in. and smaller valves and 150 psig (1,034 kPa) for 14-in. and larger valves. Power drives, corrosive service, and throttling duty are outside its scope.