ANSI/AWWA C215 describes the materials, systems, and application requirements for shop-applied extruded polyolefin coatings on the exterior of steel water pipe. Three system types are covered: Type A, crosshead-die extrusion, with an adhesive and an extruded polyolefin sheath, limited to pipe diameters 1/2 in. through 36 in. (13 mm through 900 mm); Type B, side extrusion, with an extruded adhesive and polyolefin sheath, for 2 in. (50 mm) and larger; and Type C, side extrusion, with a liquid primer, extruded butyl rubber adhesive, and polyolefin sheath, also for 2 in. and larger. Coatings have performed above potable-water service temperatures, and the manufacturer should be consulted for limits.