13 A plugs, socket-outlets, adaptors and connection units-13 A fused connection units: switched and unswitched. Specification
Publishing information: This part of BS 1363 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 June 2023. It was prepared by Technical Committee PEL/23, Electrical accessories. A list of organizations represented on this committee can be obtained on request to the committee manager. Supersession This part of BS 1363 supersedes BS 1363‑4:2016+A1:2018 which remains current and will be withdrawn on 30 June 2026. Relationship with other publications BS 1363 comprises the following five parts: Part 1: Rewirable and non-rewirable 13 A fused plugs – Specification; Part 2: 13 A switched and unswitched socket-outlets – Specification; Part 3: Adaptors – Specification; Part 4: 13 A fused connection units: switched and unswitched – Specification; Part 5: Fused conversion plugs – Specification.
Information about this document: This is a full revision of the document, and introduces the following principal changes: the Scope now covers operating frequencies from 50 Hz to 60 Hz; current carrying parts made of brass are required to have a minimum content of 58% copper; new requirements have been added for switch actuating force test for double-pole switches; mounting box clearance requirements for flush mounted connection units have been modified. The numbering of figures within this standard remains as in the previous version; however, future revisions will implement consecutive numbering throughout. Annex G gives details of the annex renumbering from the 2016 editions of BS 1363, Part 1 to Part 5 to the 2023 editions. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. BRITISH STANDARD Requirements in this standard are drafted in accordance with the Rules for the structure and drafting of UK standards:2022, subclause G.1.1, which states, “Requirements should be expressed using wording such as: ‘When tested as described in Annex A, the product shall ...’”. This means that only those products that are capable of passing the specified test will be deemed to conform to this standard. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This part of BS 1363 specifies requirements for 13 A fused fixed connection units for household, commercial and light industrial purposes, with particular reference to safety in normal use. The connection units are suitable for the connection of appliances, in a.c. circuits only, operating at voltages not exceeding 250 V r.m.s. and frequencies from 50 Hz to 60 Hz. Requirements are specified for connection units incorporating a fuse‑link conforming to Requirements are specified for 13 A connection units with or without associated controlling switches, for flush mounting in suitable enclosures, e.g. boxes conforming to BS 4662, or for surface or panel mounting. Connection units are intended for use with cables conforming to BS 6004 having copper conductors. Connection units with cable outlets are additionally intended for use with flexible cables, conforming to the relevant part of BS EN 50525 on the load (output) side. This standard does not apply to connection units incorporating screwless terminals for the connection of external conductors of the following types: a) flat quick‑connect terminals; b) insulation‑piercing connecting devices; and c) twist‑on connecting devices. Certain installations require the inclusion of intumescent and acoustic pads and this might have an effect on the conformance of the connection unit to the requirements of this standard. This might influence temperature rise and internal clearances. Verification of suitability of the connection unit needs to be obtained from the manufacturer. NOTE Requirements for electromagnetic compatibility are not given for the following reason: A connection unit is mechanical by nature of construction. A connection unit does not emit intolerable electromagnetic interference and the product is immune from electromagnetic interference.