BS 1722-14-2017 PDF

BS 1722-14-2017 PDF

Fences-Specification for open mesh steel panel

$172.72 $345.44 -50%
Publisher
isbn 9780580942211
Product Code: BS 1722-14
Stock In Stock
Published: 11/30/2017
Number of Pages: 34
File Size: 1 file, 2.7 MB

Available Options

Product Description

Fences-Specification for open mesh steel panel

Publishing information: This part of BS 1722 was published by BSI and came into effect on 30 November 2017. It was prepared by Technical Committee B/201, Fences. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This part of BS 1722 supersedes BS 1722‑14:2006, which is withdrawn. Relationship with other publications BS 1722 is published in the following parts: Part 1: Specification for chain link fences; Part 2: Specification for strained wire and wire mesh netting fences; Part 4: Specification for cleft chestnut pale fences; Part 5: Specification for close-boarded and wooden palisade fences; Part 7: Specification for wooden post and rail fences; Part 8: Specification for mild steel (low carbon steel) continuous bar fences and hurdles; Part 9: Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals; Part 10: Specification for anti-intruder fences in chain link and welded mesh; Part 11: Specification for prefabricated wood panel fences; Part 12: Specification for steel palisade fences – Manufacturing and installation – Specification; Part 14: Specification for open mesh steel panel fences; Part 16: Specification for powder coatings used as a plastics finish to components and mesh; Part 17: Specification for electric security fences – Design, installation and maintenance; Part 18: Specification for free-standing temporary steel mesh perimeter fencing panels.

Information about this document: No attempt has been made to standardize fences or gates of a purely decorative nature, nor to specify requirements for “patent” proprietary fencing systems. It is recommended, however, that such fences or gates are designed in accordance with the relevant clauses of this part of BS 1722. The principal changes introduced in this revision are to bring the requirements up to date with other parts of BS 1722 and to accommodate changes in cross references to other standards. This revision includes requirements for high security fences and for posts for fences.

Use of this document: It has been assumed in the drafting of this part of BS 1722 that the execution of its provision is entrusted to appropriately qualified and experienced people, for whose use it has been produced. Before installation commences the Lead Installer should hold a current FISS/CSCS registration card skilled level (blue card) or equivalent and all other operatives should hold the basic fence operative card (green card) or equivalent. BRITISH STANDARD At the time of publication of this British Standard the registration cards are validated by the Joint Fencing Industry Skills Scheme (FISS) and Construction Scheme Skills Certification Scheme (CSCS). FISS/CSCS maintains a national register of fence installers and operatives. There might be other schemes available.

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Requirements in this standard are drafted in accordance with Rules for the structure and drafting of UK standards, subclause G.1.1, which states, “Requirements should be expressed using wording such as: ‘When tested as described in Annex A, the product shall ...’”. This means that only those products that are capable of passing the specified test will be deemed to conform to this standard.

Scope: This part of BS 1722 specifies design, installation, testing and performance requirements for the following categories of open mesh steel panel fences: a) Category 1: General purpose fences; b) Category 2: Boundary/perimeter fences; c) Category 3: Security fences; and d) Category 4: Higher security fences. NOTE 1 See 3.1 for definitions. Maintenance of the fence after installation is outside the scope of this standard. NOTE 2 Annex A lists items to be agreed between the fence supplier and the client.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 1722-14-2017 PDF

BS 1722-14-2017 PDF

$172.72 $345.44