BS 2819-1990+A2-2016 PDF

BS 2819-1990+A2-2016 PDF

Methods for determination of bow, skew and lengthway distortion in knitted fabrics

$90.17 $180.34 -50%
Publisher
isbn 9780580941498
Product Code: BS 2819
Stock In Stock
Published: 10/31/2016
Number of Pages: 10
File Size: 1 file, 860 KB

Available Options

Product Description

Methods for determination of bow, skew and lengthway distortion in knitted fabrics

Widthway or weft bow and skew can be present in fabrics as defects causing making up difficulties, being visually displeasing and resulting in made-up articles which may function improperly. In such cases the distortion is likely to occur sporadically in certain pieces or parts of pieces and the normal provisions for random sampling may well be inappropriate. When widthway bow and skew are present as defects, it has been customary in the past for British Standard test methods to measure both defects separately. These are, however, idealized defects and the property of interest, particularly to the garment maker, is the total lengthway distortion which is generally a combination of both width-way bow and skew, and a method of measuring this is included in this edition. Lengthway distortion is generally best ascertained on the fabric rolls or bundles at the time of inspection as it is the maximum amount of distortion which is of interest in most cases and the worst areas can be most readily observed at this time. Tests are, therefore, not always carried out in the standard temperate atmosphere for testing textiles. In many instances tests made in this manner are quite acceptable. It is, however, sometimes convenient to make measurements on samples removed from the bulk as in the case of fabrics where the exact position of the threads is not obvious on the face of the fabric. In such an event, in cases of dispute and when results of high accuracy are required tests are made in the standard temperate atmosphere for testing textiles on samples removed from the bulk. Skew can also be present in some fabrics as a desirable and essential part of their construction. A specified amount of skew is needed in some fabrics if, for example, the twisting of trouser legs is to be prevented in subsequent laundering. In such cases the average percentage skew is the property of interest and tests are made in the standard temperate atmosphere for testing textiles. This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. It has been prepared under the direction This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution.

Scope: This British Standard describes methods for measuring bow, skew and lengthway distortion in knitted fabrics. NOTE The titles of the publications referred to in this British Standard are given on the inside back cover in the Bibliography. 2 Definitions For the purposes of this British Standard the following definitions apply. 2.1 bow text deleted the curvature of the wales and courses in knitted fabrics NOTE Bow may assume many different forms and some are shown in Figure 1. 2.2 skew a fabric condition where the courses, although straight, are not at right angles to the wales NOTE For example of a skew condition see Figure 2. 2.3 lengthway distortion a combination of weft bow and skew which may assume many different forms NOTE Examples of the forms assumed as a result of lengthway distortion are shown in Figure 3. Figure 1 — Types of bow Figure 2 — Illustration of skew Figure 3 — Illustrations of lengthways distortion # $ # $ text deleted # $

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 2819-1990+A2-2016 PDF

BS 2819-1990+A2-2016 PDF

$90.17 $180.34