BS 2SP 94-2019 PDF

BS 2SP 94-2019 PDF

Aerospace series. Bushes (plain and flanged), press-fit and thrust washers, oil-retaining sintered bronze. Specification

$105.41 $210.82 -50%
Publisher
isbn 9780580513275
Product Code: BS 2SP 94
Stock In Stock
Published: 10/24/2019
Number of Pages: 18
File Size: 1 file, 1 MB

Available Options

Product Description

Aerospace series. Bushes (plain and flanged), press-fit and thrust washers, oil-retaining sintered bronze. Specification

Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 October 2019. It was prepared by Technical Committee ACE/12, Aerospace fasteners and fastening systems. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This British Standard supersedes BS SP 94:1964+A2:2012, which is withdrawn.

Information about this document: This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed.

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of The Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”). Requirements in this standard are drafted in accordance with Rules for the structure and drafting of UK standards, subclause G.1.1, which states, “Requirements should be expressed using wording such as: ‘When tested as described in Annex A, the product shall ...’”. This means that only those products that are capable of passing the specified test will be deemed to conform to this standard.

Scope: This British Standard specifies material, dimensions, characteristics and identification of sintered bronze plain and flanged oil‑retaining bushes and oil‑retaining thrust washers for aircraft use. The bushes are charged with lubricating oil and have a normal oil content of from 25% − 30% by volume, within the size range from 3/16 in. (4.8 mm) to 21/2 in. (63.5 mm) nominal bore. NOTE 1 Owing to slight variations between products of different manufacturers, exact dimensions and limits for diameters are not given in this British Standard, as these dimensions are declared by respective manufacturers. Bushes supplied to this British Standard give correct bores when fitted in housings as specified. NOTE 2 The dimensional values depicted are in inch units and are to be regarded as the standard. Where metric mm equivalents are shown, they have been rounded. More accurate conversions should be based on the tables in BS 350, “Conversion factors and tables”.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 2SP 94-2019 PDF

BS 2SP 94-2019 PDF

$105.41 $210.82