BS 3247-2011+A1-2016 PDF

BS 3247-2011+A1-2016 PDF

Specification for salt for spreading on highways for winter maintenance

$147.32 $294.64 -50%
Publisher
isbn 9780580939181
Product Code: BS 3247
Stock In Stock
Published: 10/31/2016
Number of Pages: 24
File Size: 1 file, 1.5 MB

Available Options

Product Description

Specification for salt for spreading on highways for winter maintenance

Publishing information: Supersession BS 3247:2011+A1:2016 supersedes BS 3247:2011, which is withdrawn.

Information about this document: A variety of spreading machines of suitable performance exist and are covered by BS 1622, which also gives advice on minimizing the environmental impact of the use of salt on highways. The purpose of BS 3247 is to specify a material which will enable such machines to give good results, especially after the salt has been stored. In this revision of this British Standard, one of the main changes concerns the grading requirements for rock salt, with a fine grade which applies to most European salt and the retention of a coarse grade to allow a satisfactory spread on wide carriageways. Further information on the use and storage of salt for roads can be found in “Well-maintained highways: code of practice for highway maintenance management” [1]. All testing for chemical composition is now carried out on a smaller subsample to decrease dissolution time, and to improve homogeneity, repeatability and reproducibility. Grinding of samples can further reduce dissolution time but is not essential. The drying operation has been revised to remove any hazards associated with industrial methylated spirits. This standard provides Rapid (sulfate as calcium sulfate) and General (total sulfate) methods for soluble sulfate determinations (Annex I and Annex J respectively). A few hundred tonnes of urea are used per annum on highways in place of salt in order to protect some structures from the corrosive effects of salt. Where urea is used, special arrangements will need to be agreed between the user and the supplier. The previous edition of this British Standard did not contain, or define, a reproducible test for the chemical analysis of salt. The assessment of the soluble sulfate content of salt can be laborious. A rapid method for determining sulfate content as calcium sulfate content has been introduced to address this (Annex I). m Smith, British Standards Institution, 18/06/2013 14:04, Uncontrolled Copy, (c) The British Standards In This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution and came into effect on 28 February 2011. It was prepared by Technical Committee B/510, Road materials. A list of organizations represented on this committee can be obtained on request to its secretary. Text introduced or altered by Amendment No. 1 is indicated in the text by tags . Minor editorial changes are not tagged. !"

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.

Scope: This British Standard specifies the essential properties of salt for spreading on highways for winter maintenance and includes tests for some of these properties. Marking requirements are also specified. The types of salt which are used for winter road maintenance are described in Annex A. Some important considerations affecting the grade of salt to be chosen for particular purposes are given in Annex B. Information on how salt works as a de-icing agent is included in Annex C.

Contents:

  • Annexes
  • Annex A (informative) Types of salt used for winter road
  • Annex B (informative) Particle size and effectiveness 4
  • Annex C (informative) How salt works as a de-icing agent 5
  • Annex D (normative) Sampling for laboratory testing 6
  • Annex E (normative) Drying and determination of moisture
  • Annex F (normative) Grading by sieve analysis 7
  • Annex G (normative) Determination of matter insoluble in water 8
  • Annex H (normative) Determination of chloride content 10
  • Annex I (normative) Rapid determination of soluble sulfate
  • Annex J (normative) General determination of soluble sulfate

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 3247-2011+A1-2016 PDF

BS 3247-2011+A1-2016 PDF

$147.32 $294.64