BS 5918-2015 PDF

BS 5918-2015 PDF

Solar heating systems for domestic hot water. Code of practice for design and installation

$220.98 $441.96 -50%
Publisher
isbn 9780580619632
Product Code: BS 5918
Stock In Stock
Published: 01/31/2015
Number of Pages: 74
File Size: 1 file, 1.3 MB

Available Options

Product Description

Solar heating systems for domestic hot water. Code of practice for design and installation

Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 January 2015. It was prepared by Technical Committee RHE/25, Solar heating. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This British Standard supersedes BS 5918:1989, which is withdrawn.

Information about this document: This is a full revision of the standard. This standard is intended to help with the design and installation of solar heating equipment for domestic hot water (DHW). It is especially intended to help fill the gap for fitted systems that have not been tested to BS EN 12976 or BS EN 12977. Note that the use of the term “custom systems” in these standards tends to refer to a functional system provided by a single final supplier or manufacturer. An assembly comprising solar energy collection and storage components, and supplied or assembled by multiple providers, can be considered an “ad-hoc” system which is considered in this standard. The documents available as downloads from the sites referenced in the Bibliography were last accessed on 19 January 2015. WARNING. This British Standard calls for the use of substances and/or procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. Copyright is claimed on Figure 11. Copyright holders are the Met Office, FitzRoy Road, Exeter, Devon, EX1 3PB.

Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.

Scope: This British Standard gives recommendations and guidance for the installation of common indirect solar domestic hot water (SDHW) systems for all types of building in the UK. It includes recommendations and guidance for design, handling, installation, commissioning, handover, maintenance, decommissioning and fault-finding. NOTE 1 SDHW is domestic hot water (DHW) that has intentionally received heat derived from solar radiation via a solar collector. The standard covers systems: a) in which solar radiation is converted to heat that is primarily intended for domestic hot water preparation; b) that contain solar collector(s) intended to transfer heat using an aqueous-based liquid medium; c) whose solar collectors conform to BS EN 12975-1 and BS EN ISO 9806; d) which contain collectors that provide up to 20 kW instantaneous peak power output measured leaving the collector, when tested in accordance with BS EN ISO 9806 at 800 W/m2 perpendicular to the collector aperture plane; NOTE 2 Depending on the characteristics of the system, this typically equates to a gross collector area of up to approximately 30 m2. e) in which heat is primarily stored in aqueous-based liquid media; and f) in which the primary circuit is indirect with a heat exchanger that is internal to the solar storage vessel and which separates the primary heat transfer fluid that passes through the collector from the DHW. This British Standard does not cover: 1) applications that are primarily intended to provide heat for applications such as space heating, cooling or swimming pools and any other than DHW preparation; 2) solar primary system layouts that use solar storage vessels that are outside the building; 3) solar primary system layouts with multiple collector fields; 4) DHW systems that comprise multiple solar or multiple DHW storage vessels; or 5) solar primary system layouts that incorporate a heat pump or other device that utilizes the Carnot cycle.

Contents:

  • Foreword
  • Introduction
  • Scope
  • Annexes
  • Annex A (normative) Bacterial growth and safety in DHW systems
  • Annex B (informative) Characteristics of an average UK household DHW usage
  • Annex C (informative) Example primary system layouts
  • Annex D (informative) Site inspection
  • Annex E (normative) Minimum wall thickness for high-temperature EPDM-based
  • Annex F (informative) Nominal amounts of DHW supplied by point-of-use
  • Annex G (informative) Example sizing of collector active area
  • Annex H (informative) Worked example – Expansion vessel sizing
  • Annex I (informative) Troubleshooting
  • Annex J (informative) Methods for calculating loss of irradiation due to shading
  • Bibliography

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 5918-2015 PDF

BS 5918-2015 PDF

$220.98 $441.96