BS 5930-2015+A1-2020 PDF
Code of practice for ground investigations
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ACI-American Concrete Institute
- ANSI-American National Standards Institute
- API-American Petroleum Institute
- AS-Standards Australia
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASME-ASME International
- ASTM-ASTM International
- AWS-American Welding Society
- AWWA-American Water Works Association
- BS-BSI Group
- ISO-International Organization for Standardization
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- SAE-SAE International
- UL-Underwriters Laboratories
- UNE-Asociación Española de Normalización
Your shopping cart is empty!
Product Description
Code of practice for ground investigations
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 July 2015. It was prepared by Subcommittee B/526/3, Site investigation and ground testing, under the authority of Technical Committee B/526, Geotechnics. A list of organizations represented on these committees can be obtained on request to their secretary. Supersession BS 5930:2015 superseded BS 5930:1999+A2:2010, which was withdrawn. BS 5930:2015+A1:2020 supersedes BS 5930:2015, which is withdrawn.
Information about this document: The first edition of this British Standard (published as CP2001:1957) covered basic guidance on effective ground investigation. This was replaced by full editions in 1981 and 1999, which covered the subject matter in greater detail and each of which was brought up to date at the time of publication. The 1999 edition was amended twice to incorporate changes necessary to maintain compliance with BS EN 1997‑1 and BS EN 1997‑2 and their related standards. BS 5930:2015 was a full revision of the standard, and introduced the following principal changes. The majority of changes arose from the further implementation into UK practice of BS EN 1997‑1 and BS EN 1997‑2 and the related test standards cited therein and the need to conform to these standards. The revision of material that was out of date. There was new information on geophysical surveying and ground testing and updated guidance on ground investigations on contaminated ground, changes to accommodate the requirements of data capture in the field and the inclusion of this in reporting as well as other amendments throughout the standard. Text introduced or altered by Amendment No. 1 is indicated in the text by tags . Minor editorial changes are not tagged. Product certification. Users of this British Standard are advised to consider the desirability of third‑party certification with this British Standard. Appropriate conformity attestation arrangements are described in BS 22475‑3. Users seeking assistance in identifying appropriate conformity assessment bodies or schemes may ask BSI to forward their enquiries to the relevant association. Test laboratory accreditation. Users of this British Standard are advised to consider the desirability of selecting test laboratories that are accredited to BS EN ISO/IEC 17025 by a national or international accreditation body.
Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. vi © THE BRITISH STANDARDS INSTITUTION 2020 – ALL RIGHTS RESERVED It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.
Scope: This British Standard gives recommendations for the investigation of sites for the purposes of assessing their suitability for the construction of civil engineering and building works and of acquiring knowledge of the characteristics of a site that could affect the design and construction of such work and the security of neighbouring land and property. NOTE 1 The use of soil and rock as construction materials is treated only briefly; further information is given in This British Standard provides guidance on the application of BS EN 1997-1 and BS EN 1997-2 and the related test standards cited therein. It does not provide guidance on investigations for contamination or naturally elevated concentrations of potentially hazardous substances (these are dealt with in BS 10175). Nor does it provide guidance on investigations for ground gas (these are dealt with in BS 8576). However, it does provide guidance on the integration of geotechnical investigations with investigations for contamination or ground gas and other types of investigations (e.g. archaeological). NOTE 2 BS 10175 is used with the BS ISO 18400 series of standards. Much of the detailed guidance in earlier versions of BS 10175 has been replaced or supplemented by reference to parts of the BS ISO 18400 series. For simplicity and to avoid repetition, all references to BS 10175 in this British Standard embrace the need to refer to applicable parts of the BS ISO 18400 series of standards as necessary.



