Planning, design, installation and use of permanently installed access equipment. Code of practice-Suspended access equipment
Publishing information: This part of BS 6037 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 October 2017. It was prepared by Subcommittee MHE/12/7, Suspended Access Equipment, under the authority of Technical Committee MHE/12, Lifting Platforms. A list of organizations represented on these committees can be obtained on request to their secretary. Supersession This part of BS 6037 supersedes BS 6037‑1:2003, which is withdrawn.
Information about this document: This is a full revision of the standard, and introduces the following principal changes: a) recommendations for manual rigging (maximum weights and heights); b) ongoing testing of auxiliary hoists; c) recommendations for refresher training/instruction; d) reference to early/beneficial use; and e) updates to bring in line with BS EN 1808:2015 and CDM Regulations 2015 [1].
Use of this document: As a code of practice, this part of BS 6037 takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this part of BS 6037 is expected to be able to justify any course of action that deviates from its recommendations.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.
Scope: This part of BS 6037 gives recommendations for the planning, design, installation, use, examination, maintenance and testing of permanently installed suspended access equipment, including equipment installed on a building to facilitate continuing routine maintenance of the building. It is intended for use by those involved in specifying, designing, managing the use of, maintaining and examining permanently installed suspended access equipment. This British Standard does not cover industrial rope access and work positioning techniques, recommendations for which are given in BS 7985.