Painting of buildings. Code of practice
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 March 2019. It was prepared by Technical Committee STI/28, Paint systems for non-metallic substrates. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession BS 6150:2019 supersedes BS 6150:2006+A1:2014, which is withdrawn.
Information about this document: This is a full revision of the standard, and it has been restructured and prepared to reflect changes in legislation and coating material technology, and to provide a document that is more accessible and appropriate for the sector. Attention is drawn to the Construction (Design and Management) Regulations 2015 [1] and the Construction (Design and Management) Regulations (Northern Ireland) 2016 [2] which set out the responsibilities of those involved in construction work, including clients, designers, contractors and workers (available from http://www.legislation.gov.uk/uksi/2015/51/contents/made1). Product references indicated in the text by figures in parentheses, e.g. (B.1/2), refer to the products listed and described in the tables within the annexes. Hazard warnings WARNING. This British Standard calls for the use of substances and/or procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage.
Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions in this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is "should". The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Last accessed 20 March 2019. BRITISH STANDARD Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This British Standard gives recommendations for good practice in preparation, initial painting and maintenance painting of buildings (e.g. dwellings, offices, light industrial buildings, schools, hospitals, hotels and public buildings generally) internally and externally, in which decoration is a significant and often the major factor. This British Standard takes into account the need to protect many building materials against weathering or other forms of attack normally encountered. Detailed information is given on wood, metal, masonry and other typical substrates found in buildings. The paints and coating materials referred to in this British Standard are principally those in common use, with limited reference to specialist coating materials and factory-applied coatings. Some materials have been excluded because of their obsolescence, limited or specialized usage or, in the case of newly developed products, lack of experience of their performance in service. This British Standard does not cover: a) the protection of structural steel elements (see BS EN ISO 12944, and BS 5493 for iron structures), including hot spray application; BRITISH STANDARD b) decorative processes and other work usually carried out by specialists, such as asbestos encapsulation, the maintenance of lead surfaces, resin flooring, polymer renders or waterproofing of flat roofs; c) the particular requirements of listed or historic buildings which are protected by law; d) limewash and distemper coating materials; e) preservative treatments for structural timber; f) reactive coating materials for passive fire protection and systems consisting of these materials (see BS 8202‑1, BS EN 16623 and BS 476); and g) general safety hazards of access for painting (see BS 8210). The recommendations made in this British Standard are intended to facilitate achievement of standards of finish which, when inspected as described in Clause 10, will be of a generally acceptable commercial standard for the intended t