BS 7121-5-2019 PDF

BS 7121-5-2019 PDF

Code of practice for safe use of cranes-Tower cranes

$220.98 $441.96 -50%
Publisher
isbn 9780539009835
Product Code: BS 7121-5
Stock In Stock
Published: 09/27/2019
Number of Pages: 128
File Size: 1 file, 7.4 MB

Available Options

Product Description

Code of practice for safe use of cranes-Tower cranes

Publishing information: This part of BS 7121 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 September 2019. It was prepared by Subcommittee MHE/3/11, Crane safety and testing, under the authority of Technical Committee MHE/3, Cranes and derricks. A list of organizations represented on these committees can be obtained on request to their secretary. Supersession This part of BS 7121 supersedes BS 7121‑5:2006, which is withdrawn. Relationship with other publications The Lifting Operations and Lifting Equipment Regulations (LOLER) [1] and the Provision and Use of Work Equipment Regulations (PUWER) [2] came into force on 5 December 1998. Details of the Regulations, an Approved Code of Practice plus HSE guidance can be found in the HSE Approved Codes of Practice Safe use of lifting equipment [3] and Safe use of work equipment [4]. This part of BS 7121 is intended to be read in conjunction with BS 7121‑1, which provides general recommendations for crane types not covered in an additional part of BS 7121. BS 7121‑2 covers in-service inspection, thorough examination and, where appropriate, testing for the safe use of all types of crane. Subsequent parts of BS 7121 deal (or will eventually deal) with the specific crane types as follows: Part 3: Mobile cranes; Part 4: Lorry loaders; Part 5: Tower cranes; Part 6: Derrick cranes; Part 7: Bridge and gantry cranes, including light crane systems; Part 8: High pedestal and portal jib dockside cranes; Part 9: Container handling cranes; Part 10: Rail-mounted cranes; Part 11: Offshore cranes; Part 12: Recovery vehicles and equipment; Part 13: Hydraulic gantry lifting systems; Part 14: Side boom pipe layers. The BS 7121 series has been accepted as representing the consensus of practical experience for safety on cranes.

Information about this document: This is a full revision of the standard, and introduces the following principal changes: alignment with BS 7121‑1:2016; and addition of recommendations from CPA Technical Information Notes. BRITISH STANDARD It is intended to be used in conjunction with other parts of BS 7121 to ensure, so far as is reasonably practicable, that lifting operations are carried out safely. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed.

Use of this document: As a code of practice, this part of BS 7121 takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this part of BS 7121 is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).

Scope: This part of BS 7121 gives recommendations for the safe use of tower cranes, including self‑erecting tower cranes other than mobile self-erecting tower cranes (which are covered in BS 7121‑3). NOTE The types of tower crane are set out in Annex A. Subjects covered include safe systems of work, selection, erection, extension (including climbing), dismantling, maintenance, inspection, thorough examination (including testing), operation, and the planning and management of lifting operations. It also covers the appropriate selection and training of personnel involved in the safe installation and use of tower cranes. This part of BS 7121 is intended to be read in conjunction with BS 7121‑1.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 7121-5-2019 PDF

BS 7121-5-2019 PDF

$220.98 $441.96