- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ACI-American Concrete Institute
- ANSI-American National Standards Institute
- API-American Petroleum Institute
- AS-Standards Australia
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASME-ASME International
- ASTM-ASTM International
- AWS-American Welding Society
- AWWA-American Water Works Association
- BS-BSI Group
- ISO-International Organization for Standardization
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- SAE-SAE International
- UL-Underwriters Laboratories
- UNE-Asociación Española de Normalización
Your shopping cart is empty!
Product Description
Safe working on lifts. Code of practice
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 November 2023. It was prepared by Technical Committee MHE/4, Lifts, hoists and escalators. A list of organizations represented on this committee can be obtained on request to the committee manager. BSI Committee MHE/4 takes collective responsibility for the preparation of this British Standard. The Committee wishes to acknowledge the personal contribution of Dr Gina Barney to this British Standard and to the work of MHE/4 from 1992 to 2023. Supersession This British Standard supersedes BS 7255:2012, which is withdrawn.
Information about this document: This is a full revision of the document, and introduces the following principal changes: a) restructuring of the main clauses; b) updates to accommodate new legislation; c) updates to accommodate new and revised standards published since 2012; d) new recommendations for an owner’s safety survey and documentation; e) new recommendations on reporting and exchange of information; f) replacement of specific qualifications with references to industry guidance; g) new procedures for removing an unsafe lift from service; h) new checks and tests on changes before returning a lift to service; i) new recommendations for the wellbeing of a person working with others; j) revision of recommendations for electrical working; k) new and revised procedures for safe working on the car top and in the pit; l) new procedures for safe working in machinery spaces; and m) revised recommendations for major repair and dismantling. Copyright is claimed in the following elements of the document: definitions 3.2, 3.11, 3.13, 3.19, 3.26 and 3.27; Table A.1; and Figure B.1. The content has been reproduced with the permission of the European Committee for Standardization (CEN). Copyright remains with CEN. All rights reserved. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. IV © THE BRITISH STANDARDS INSTITUTION 2023 – ALL RIGHTS RESERVED Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. Hazard warnings WARNING. This British Standard calls for the use of substances and/or procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage.
Use of this document: As a code of practice, this British Standard takes the form of recommendations and guidance. It is not to be quoted as if it were a specification. Users are expected to ensure that claims of compliance are not misleading. Users may substitute any of the recommendations in this British Standard with practices of equivalent or better outcome. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions in this document are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.
Scope: This British Standard gives recommendations for safe working practices (supported by training) to be undertaken by: a) owners of permanently installed lifts serving defined landing levels; b) persons having effective control of the premises where such lifts are installed; and c) persons responsible for, and involved in, the design, installation, commissioning, testing, maintenance, thorough examination, inspection, repair and dismantling of such lifts. This British Standard gives recommendations for the safety of persons when gaining access to and from the work area on a lift installation and while working there. The recommendations also relate to the safety of others present in the vicinity, whether they are working or not, who could be endangered by the actions of those working on lifts. This British Standard does not give recommendations for installation methods and procedures, nor does it give recommendations for procedures to be carried out following an accident or serious incident. This British Standard does not cover the following types of lifting devices: 1) lifts that are not permanently installed; 2) stair lifts; 3) lifting platforms; NOTE 1 Recommendations for safe working on lifting platforms are given in BS 9102. 4) vertical lifting appliances with an enclosed carrier (“slow speed lifts”); NOTE 2 This refers to slow speed lifts designed under the Supply of Machinery (Safety) Regulations 2008 [2]. 5) lifts moving along guide rails inclined more than 15° to the vertical; and 6) other lifting appliances such as paternosters, mine lifts, access lifts to workplaces, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for construction sites, ships’ hoists, platforms for exploration or drilling at sea, construction and maintenance appliances.



