BS 7592. Sampling for Legionella bacteria in water systems. Code of practice
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 28 February 2022. It was prepared by Subcommittee EH/3/4, Microbiological methods, under the authority of Technical Committee EH/3, Water quality. A list of organizations represented on these committees can be obtained on request to the Committee Manager. Supersession This British Standard supersedes BS 7592:2008, which is withdrawn.
Information about this document: This is a full revision of the standard, and introduces the following principal changes: a) a clearer distinction is made between routine and incident sampling; b) a clearer rationale is provided for routine sampling, including newly recognized sources, risk assessment, surveying and sample points; c) acceptable transport times have been revised to account for more quantitative results and sampling/transport subcontracting; and d) it takes account of new standards documents for water sampling and analysis. Product certification/inspection/testing. Users of this British Standard are advised to consider the desirability of third-party certification/inspection/testing of product conformity to this British Standard. Appropriate conformity attestation arrangements are described in BS EN ISO/IEC 17025. Users seeking assistance in identifying appropriate conformity assessment bodies or schemes may ask BSI to forward their enquiries to the relevant association. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. Hazard warnings WARNING. This British Standard calls for the use of substances and/or procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage.
Use of this document: As a code of practice, this British Standard takes the form of recommendations and guidance. It is not to be quoted as if it were a specification. Users are expected to ensure that claims of compliance are not misleading. Users may substitute any of the recommendations in this British Standard with practices of equivalent or better outcome. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. BRITISH STANDARD It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This British Standard gives recommendations and guidance on the sampling of water and related materials for the investigation of the presence of organisms of the genus Legionella. It is applicable to sampling constructed water systems but also gives methods for sampling of biofilms and sediments that might be present. Some of the same sampling principles can be applied to natural water systems. This British Standard is applicable to the selection of sampling sites and the methods of sampling for the purposes of routine monitoring, validation, commissioning, investigating a problem, or outbreak investigation. Recommendations and guidance on the selection of sampling points are given. The rationale for the selection of sampling points for particular situations is also covered. This British Standard is intended for use by all those involved in water sampling for legionellae, including those collecting samples on site and those developing water sampling plans and/or directing where samples are taken from, irrespective of the method of analysis adopted. It is not applicable to the sampling of soils and horticultural potting mixtures.