Closed circuit television (CCTV). Management and operation. Code of practice
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 August 2015. It was prepared by Technical Committee GW/3, Manned security services. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This British Standard supersedes BS 7958:2009, which is withdrawn.
Information about this document: This is a full revision of the standard, which has been updated to reflect current practice.
Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.
Scope: This British Standard gives recommendations for the management and operation of CCTV within a controlled environment, where data that might be offered as evidence are received, stored, reviewed or analysed. This standard applies to the monitoring and management of public spaces, including automatic number plate recognition (ANPR) and traffic enforcement cameras. For control rooms whose operation falls within the scope of BS 7499, BS 5979 or BS 8591, all of the security requirements, both physical and procedural, of the relevant British Standard remain applicable. This British Standard is applicable to CCTV schemes used in public places such as the following: a) areas where the public are encouraged to enter or have a right to visit, such as town centres, shopping malls, public transport, health establishments; b) schemes that overlook a public place, such as traffic monitoring and traffic enforcement schemes; and c) private schemes where a camera view includes a partial view of a public place. This British Standard also provides good practice for all other CCTV schemes. This British Standard takes due regard of the 12 guiding principles of the Surveillance Camera Code of Practice [7] (see Annex A) and the Information Commissioner’s CCTV Code of practice [8] and the Data Protection Act 1998 [1] principles (see Annex B).
Contents:
- Foreword
- Introduction
- Scope
- Annexes
- Annex A (informative) Surveillance Camera Code of Practice – 12 guiding
- Annex B (informative) Data Protection Act 1998 – 8 guiding principles
- Annex C (normative) Contractor responsibilities within BS 7958
- Annex D (normative) Management and operation of CCTV traffic enforcement
- Annex E (normative) Contracted remote CCTV control centre responsibilities
- Bibliography