BS 8297-2017 PDF

BS 8297-2017 PDF

Design, manufacture and installation of architectural precast concrete cladding. Code of practice

$204.47 $408.94 -50%
Publisher
isbn 9780580945564
Product Code: BS 8297
Stock In Stock
Published: 10/31/2017
Number of Pages: 62
File Size: 1 file, 2.9 MB

Available Options

Product Description

Design, manufacture and installation of architectural precast concrete cladding. Code of practice

Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 October 2017. It was prepared by Technical Committee B/524, Precast concrete products. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This British Standard supersedes BS 8297:2000, which is withdrawn.

Information about this document: This is a full revision of the standard, and introduces the following principal changes: clarification of scope; updated terms and definitions; dimensions for certain components; describes the provisions necessary for the cladding to perform its function saticfactorily; and gives the minium standards required of materials and methods to be employed.

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.

Scope: This British Standard gives recommendations and guidance for the design, manufacture, transport and installation of architectural precast concrete units in the form of: a) units supported by and fixed to a structural frame or wall to perform a cladding role; NOTE These might be part of the external envelope or separate elements, such as columns and balconies. b) units which may neither be associated with, or form part of, a building; c) units used as permanent formwork in part or in whole, but limited to architectural elements; and d) the architectural function of a sandwich panel (see 3.7.3). It includes recommendations on the measures which are to be taken to provide for permanent and temporary movements and tolerances of the structure, to enable the cladding to perform its function satisfactorily. It gives the minimum standards needed and the materials and methods of fixings most frequently used. It applies to new buildings but many provisions might be applicable to alterations or refurbishment of existing buildings. Guidance is given on the quality of the finished product and verification of performance. The design recommendations given in this British Standard are based on limit state design principles. This British Standard is intended to be used in conjunction with BS EN 13369:2013 and BS EN 13670, but provides comprehensive guidance specifically in relation to architectural precast concrete cladding and therefore takes precedence in the items addressed. This British Standard does not provide recommendations relevant to units incorporating glass fibre reinforced concrete (GFRC/GRC), semi-dry or small wet-cast masonry units instead of larger architectural wall cladding panels (see BS 1217), nor the design of the supporting structure to which the units might be attached.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 8297-2017 PDF

BS 8297-2017 PDF

$204.47 $408.94