Design and installation of natural stone cladding and lining-Stone-faced precast concrete cladding systems. Code of practice
Publishing information: This part of BS 8298 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 December 2020. It was prepared by Technical Committee B/545, Natural stone. A list of organizations represented on this committee can be obtained on request to the committee manager. Supersession This part of BS 8298 supersedes BS 8298‑3:2010, which is withdrawn. Together with BS 8298‑2:2020 and BS 8298‑4:2020 this part supersedes BS 8298‑1:2010, which is withdrawn. Relationship with other publications BS 8298, Design and installation of natural stone cladding and lining, will eventually be issued in four parts: Part 2: Traditional handset external cladding ‒ Code of practice; Part 3: Stone‑faced precast concrete cladding systems ‒ Code of practice; Part 4: Stone cladding on rainscreen support systems ‒ Code of practice; and Part 5: Natural stone lining ‒ Code of practice.1) The recommendations for production control testing that were previously given in Part 1: General have or will be incorporated into Parts 2 to 5, so that Part 1 is withdrawn.
Information about this document: This is a full revision of the standard, and incorporates the recommendations for production control testing from BS 8298‑1:2010. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. Assessed capability. Users of this British Standard are advised to consider the desirability of quality system assessment and registration against the appropriate standard in the BS EN ISO 9000 series by an accredited third-party certification body.
Use of this document: As a code of practice, this part of BS 8298 takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this part of BS 8298 is expected to be able to justify any course of action that deviates from its recommendations. 1) In preparation. ii © THE BRITISH STANDARDS INSTITUTION 2020 – ALL RIGHTS RESERVED
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This part of BS 8298 gives recommendations for the design, installation and maintenance of natural stone directly attached to precast concrete units (i.e. stone-faced concrete cladding units as defined in BS 8297). It is not applicable to loadbearing stones or stones held only by adhesion or to any type of stonework supported or held in position around the perimeter of stones or series of stones by metal framing. Guidance on the design of the precast concrete unit and fixing is given in BS 8297. Different cladding and lining methods are covered in the other parts of BS 8298 (see Foreword).