BS 8300-1-2018 PDF
Design of an accessible and inclusive built environment-External environment. Code of practice
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ACI-American Concrete Institute
- ANSI-American National Standards Institute
- API-American Petroleum Institute
- AS-Standards Australia
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASME-ASME International
- ASTM-ASTM International
- AWS-American Welding Society
- AWWA-American Water Works Association
- BS-BSI Group
- ISO-International Organization for Standardization
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- SAE-SAE International
- UL-Underwriters Laboratories
- UNE-Asociación Española de Normalización
Your shopping cart is empty!
Product Description
Design of an accessible and inclusive built environment-External environment. Code of practice
Publishing information: This part of BS 8300 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 January 2018. It was prepared by Technical Committee B/559, Access to buildings for disabled people. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession Together with BS 8300‑2, this document supersedes BS 8300:2009+A1:2010, which is withdrawn. Relationship with other publications BS 8300 is published in the following parts: Part 1: External environment – Code of practice; Part 2: Buildings – Code of practice.
Information about this document: A full revision of BS 8300:2009+A1:2010 has been undertaken. The principal change is to divide the document into two parts, as described below. The principal changes in respect of the external environment content are the addition of recommendations concerning: inclusive design; street design; public facilities includes temporary external events; specific locations; street furniture; external lighting; management issues associated with the external environment. The recommendations for street design do not include any advice on shared space/shared surfaces, as responses to the public consultation on this edition of BS 8300-1 indicate that the subject is controversial, and further research is required before the subject can be covered in any detail in the standard. During the revision, some changes were required to consolidate the changes made in BS 8300:2009+A1:2010, and many others to incorporate changes thought necessary by the Technical Committee following consideration of comments submitted by the public, organizations of disabled people and built environment professionals. More fundamentally, changes in the content have been necessitated by the decision to restructure BS 8300 into two parts, one to cover buildings and one to cover the external built environment. The latter incorporates material relating to the external environment that previously appeared in the original standard (e.g. parking, external ramps and external stairs), but it has also been expanded to include aspects of the wider external environment that were not covered in the original standard. These new aspects have been developed from BIP 2228. Following the precedent established by the first edition of BS 8300, the structure of the two new parts follows the logic of the “journey sequence”, starting with the new BS 8300‑1 dealing with the wider external built environment, and BS 8300‑2 dealing with the building itself. In the course IV © THE BRITISH STANDARDS INSTITUTION 2018 – ALL RIGHTS RESERVED of restructuring the document, the drafting panels have also taken the opportunity to update the guidance and recommendations in the light of current good practice, including a comprehensive introduction to inclusive design and its place in the wider design process, and to take into account the content of new or revised standards published since 2010. BS 8300 no longer gives guidance on individual dwellings as this is now covered by BS 9266. The provisions in BS 8300 are based on ergonomic research conducted in 1999. The Technical Committee responsible for BS 8300 is aware of changing requirements relating to the variety of mobility aids now available and the physical space needed to use such devices, as well as the implications of the increasing use of technology and new building construction methods. However, at the time of publication of this edition of the standard, the committee does not know of any new ergonomic research on which to base changes to the space recommendations within the standard. Many of the general access requirements of disabled children will be addressed by the recommendations in the standard. However, at the time of publication of this standard, the committee does not know of any ergonomic research that would justify any more specific recommendations being given. Detailed guidance on designing schools for disabled children and children with special educational needs is available in Building Bulletin 102 [1]. Since publication of the amended 2009 edition of BS 8300, the International Organization for Standardization (ISO) has published ISO 21542, which covers accessibility and usability of the built environment and is undergoing revision at the time of publication of this edition of BS 8300. Also, the European Commission has issued a mandate (Mandate 420) to European Standards bodies CEN and CENELEC to prepare a European Standard on accessibility requirements for public procurement in the built environment. The outcome of these processes will be taken into account in the next regular review of BS 8300.
Use of this document: As a code of practice, this part of BS 8300 takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this part of BS 8300 is expected to be able to justify any course of action that deviates from its recommendations. The recommendations in this British Standard are accompanied by scene‑setting commentary that places the recommendations in context for readers not familiar with the barriers experienced by disabled people when using the external environment and approaching buildings. In some instances, recommendations are quite specific; in others, they include dimensional ranges. Where dimensions and/or measurements are stated, they are subject to tolerances. Dimensional ranges are intended to provide designers with some flexibility of design solution.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”). Websites referred to in this standard were last viewed on 3 January 2018. BRITISH STANDARD



