BS 8547-2016 PDF

BS 8547-2016 PDF

Respiratory equipment. Breathing gas demand regulator used for diving to depths greater than 50 metres. Requirements and test methods

$105.41 $210.82 -50%
Publisher
isbn 9780580892134
Product Code: BS 8547
Stock In Stock
Published: 03/31/2016
Number of Pages: 16
File Size: 1 file, 690 KB

Available Options

Product Description

Respiratory equipment. Breathing gas demand regulator used for diving to depths greater than 50 metres. Requirements and test methods

Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 March 2016. It was prepared by Subcommittee PH/4/7, Underwater breathing apparatus, under the authority of Technical Committee PH/4, Respiratory protection. A list of organizations represented on these committees can be obtained on request to their secretary. Relationship with other publications BS EN 250 gives the requirements for demand regulators to a depth of 50 m. Similarly, BS EN 15333-1 gives the requirements for demand regulators to a depth of 60 m. This British Standard gives requirements for demand regulators in self-contained diving apparatus (BS EN 250) beyond 50 m and for demand regulators in umbilical supplied apparatus (BS EN 15333-1) beyond 60 m.

Information about this document: This British Standard uses the principle of gas density to cover all depth and gas mixtures used below 50 m. The intention of this British Standard is to define the performance requirements for demand diving regulators without imposing a maximum depth limit.

Presentational conventions: The provisions of this British Standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.

Scope: This British Standard specifies minimum performance requirements for diver carried breathing gas demand regulators for open-circuit and saturation gas reclaim systems used for diving to depths greater than 50 m. This British Standard defines additional requirements for breathing performance and helium compatibility to those already given in BS EN 250 and NOTE The basic requirements for diving apparatus and demand regulators as per BS EN 250 and BS EN 15333-1 have been retained. The exception here is for the breathing performance which is revised in this British Standard to cover the requirement for use at depths greater than 50 m. This British Standard specifies a test method for helium compatibility with a demand regulator and a test method for measuring the work of breathing (WOB) and respiratory pressures of a demand regulator. This British Standard does not cover auxiliary emergency breathing systems; they are covered in BS EN 250:2014, Annex B.

Contents:

  • Foreword
  • Scope
  • Annexes
  • Annex A (informative) Gas density and gas mixtures

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 8547-2016 PDF

BS 8547-2016 PDF

$105.41 $210.82