Provision and management of temporary water supplies and distribution networks (not including provisions for statutory emergencies). Code of practice
Publishing information: This British Standard is published by BSI and came into effect on 30 September 2015. It was prepared by BSI Panel EH/3/-/1, Panel for BS 8551, under the authority of Technical Committee EH/3, Water quality. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession BS 8551:2015 supersedes BS 8551:2011, which is withdrawn.
Information about this document: This is a full revision of the standard to keep it up to date. This document is intended for application when there is a temporary loss of a piped water supply or where there is a limited or no piped water supply available that is not the responsibility of a water undertaker or licensed water supplier (e.g. burst of private supply pipe). It is also intended to be applicable to the provision of temporary water distribution systems for public events or construction sites.
Use of this document: It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced. All personnel involved in the deployment and use of tankers, static tanks and bowsers (for drinking water purposes) are expected to hold the National Water Hygiene Card (see https://www.eusr.co.uk/eusr/the-eusr-card/the-national-water-hygiene-card) [viewed: 14 September 2015]. Test laboratory accreditation. Users of this British Standard are advised to consider the desirability of selecting test laboratories that are accredited to BS EN ISO/IEC 17025 by a national or international accreditation body. A list of accredited laboratories is provided at www.dwi.gov.uk [viewed: 14 September 2015]. WARNING. This British Standard calls for the use of substances and/or procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the Clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.
Scope: This British Standard gives recommendations and guidance for the provision and management of temporary water supplies and distribution networks to ensure the water supplied for domestic purposes is wholesome. It is applicable to situations when a permanent supply is insufficient, not available or not required, for example, at building sites and outdoor public events. NOTE The drinking water regulators, water undertakers and local authorities have in place collective arrangements for dealing with operational events, incidents and emergencies in relation to both public and private water supplies, and they ought always to be informed and/or consulted before a temporary water supply arrangement is put in place. The standard gives recommendations and guidance on procedures and documentation for: a) risk assessment and management; b) supplying, maintaining and cleaning vessels used to collect and transport wholesome water or function as temporary supply points; c) storage and quality control of bottled water stocks intended for temporary supply; d) connecting to a permanent distribution network for extraction purposes, avoiding contamination risks; e) installing temporary water storage vessels and temporary pipework for distribution networks serving temporary water draw-off points whilst avoiding contamination risks; and f) monitoring and sampling. This British Standard is intended to provide guidance on good practice related to anticipated temporary water supplies and installation of temporary distribution networks, but its principles are applicable to contingency arrangements for water supply incidents and emergencies. The British Standard also gives guidance on water supply hygiene and management practices which can involve staff training and/or operational procedures. The British Standard relates to the supply of water that has already been treated to make it safe for drinking, and its provisions are intended to prevent contamination. The British Standard is not appli
Contents:
- Foreword
- 0 Introduction
- Scope
- Annexes
- Annex A (normative) Staff water quality awareness training
- Annex B (informative) Flow demands
- Annex C (informative) Chloraminated water
- Annex D (informative) Information required to manage the provision of a
- Annex E (informative) Guidelines for the preparation and use of chlorine and
- Annex F (informative) Example drinking water tanker or wheeled bowser driver
- Annex G (informative) Chlorine concentration, contact period for tank
- Bibliography