Fire performance of external cladding systems. The application of results from BS 8414-1 and BS 8414-2 tests
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 September 2019. It was prepared by Technical Committee FSH/21, Reaction to fire tests. A list of organizations represented on this committee can be obtained on request to its secretary. Relationship with other publications This British Standard is intended to be read in conjunction with BS 8414-1:2015+A1:2017 and BS 8414-2:2015+A1:2017.
Information about this document: The rules and associated guidance in this British Standard have been compiled to reflect the current knowledge base that exists for the series of BS 8414 tests, results and experience from such tests, and insulated non-load bearing facade constructions in general. It is therefore recognized that future experience could lead to changes to the rules and guidance provided or the development of further rules and guidance. Where it is considered that there is insufficient evidence at present to create a rule then the option for change is shown as “not permissible”. It is also intended to widen the scope of this British Standard in future to cover application rules for glazing, infill panels and curtain walling external wall construction systems. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed.
Use of this document: It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”). IV © THE BRITISH STANDARDS INSTITUTION 2019 – ALL RIGHTS RESERVED
Scope: This British Standard specifies procedures and rules used to evaluate variations and changes to products and systems which have been tested in accordance with BS 8414-1:2015+A1:2017 or BS 8414-2:2015+A1:2017, and, where appropriate, defines options and limits for preparing reports based on the direct and extended application criteria provided. The following systems are covered: rain-screens; external thermal insulated composite systems (ETICS); self-supporting double skin metal faced insulating (sandwich) panels. This British Standard covers specific parameters and product characteristics associated with the design of non-loadbearing external cladding systems which have been tested in accordance with This British Standard does not cover the performance of systems that include glazed elements, infill panels or external insulation finishing systems (EIFS). This British Standard does not cover systems that have been tested in accordance with BS EN 1364. NOTE Guidance for extending the scope of application for BS EN 1364 tests is given in BS EN 15254-2, BS EN 15254-4, BS EN 15254-5, BS EN 15254-6 and BS EN 15254-7.