Non automatic fire-fighting systems in buildings. Code of practice
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 January 2015. It was prepared by Technical Committee FSH/14, Fire precautions in buildings. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This British Standard supersedes BS 9990:2006, which is withdrawn.
Information about this document: This is a full revision of the standard. The principal changes are to update the recommendations for: flow tests and pressures; rising and falling mains; pumps; maintenance; shut-off pressures. It is important for the fire protection of a building to be considered as a whole. The provision of fire mains is an essential element of the fire protection systems in large and complex buildings due to the difficulties in providing water supplies at the point of use for fire-fighting and search and rescue. It is essential that these systems be carefully maintained to ensure instant readiness when required.
Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations.
Presentational conventions: The provisions in this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This British Standard gives recommendations for non-automatic fire-fighting systems in buildings. It covers good practice in matters affecting the design, installation, testing and maintenance of such systems including wet and dry fire-fighting mains. This British Standard does not cover hose reels, foam inlets, automatic foam systems and portable fire-fighting equipment. These systems are covered in BS EN 671-1, BS 5306-1, BS 5306-3, BS 5306-8 and BS EN 3-7.
Contents:
- Foreword
- Scope
- Annexes
- Annex A (normative) Protecting installed equipment from theft and
- Bibliography