BS +AU 148-11-1969 PDF

BS +AU 148-11-1969 PDF

Methods of test for motor vehicle paints-Resistance to blistering

$105.41 $210.82 -50%
Publisher
isbn 0580053180
Product Code: BS +AU 148-11
Stock In Stock
Published: 03/31/1969
Number of Pages: 16
File Size: 1 file, 4.1 MB

Available Options

Product Description

Methods of test for motor vehicle paints-Resistance to blistering

Scope: This Part of this British Standard specifies methods used for testing the resistance to blistering of paints for motor vehicles. 2 Test panels For Tests 1, 2 and 3, test panels shall be 150 mm × 100 mm or other convenient size, specified and pretreated in accordance with the requirements of BS 3900-A32) (note particularly Clause 2.2) and shall be coated in accordance with the requirements of BS 3900-A42), with the paint system to be tested. Normally steel panels are used but it may be appropriate to use other substrates. The panels shall be aged, under normal laboratory conditions, for 7 days unless otherwise agreed. 3 Test methods 3.1 Test 1. Humidity cabinet, cycling. The humidity cabinet cycling test is intended to provide information regarding the behaviour of a paint film or paint system under conditions of deliberately induced condensation. The method employed and the apparatus used shall be that described in BS 3900-F22). 3.2 Test 2. Humidity cabinet, non-cycling 3.2.1 The humidity cabinet, non-cycling test is intended to provide information regarding the behaviour of a paint film or paint system under conditions of continuous high humidity. Theoretically, any non-cycling test cabinet will cause condensation on panels only if these are cold when inserted into the cabinet and no drying of the condensed moisture can take place in an atmosphere of 100 % relative humidity. Conversely, if the panels are hot at the commencement of the test, or if they are heated together with the whole cabinet, no condensation should take place. In practice, however, some cycling occurs owing to the impossibility of obtaining perfect insulation of the apparatus, the nature of the cycle depending on the order of heat losses and on the temperature of the surrounding air. 3.2.2 Test cabinet. The cabinet shall be capable of producing and maintaining an atmosphere of not less than 96 % relative humidity at a temperature of 38 ± 1 °C. The cabinet shall be constructed of non-corrosive mat

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS +AU 148-11-1969 PDF

BS +AU 148-11-1969 PDF

$105.41 $210.82