Damage management. Code of practice for the organization and management of the stabilization, mitigation and restoration of properties, contents, facilities and assets following incident damage
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 November 2015. It was prepared by Technical Panel CAR/1/-/6, Damage management, under the authority of Technical Committee CAR/1, Continuity and resilience. A list of organizations represented on this committee can be obtained on request to its secretary. Relationship with other publications This code of practice builds on the existing BDMA Standards: Guidelines relating to the protocols and procedures for dealing with incidents or perils that damage properties [1].
Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.
Scope: This British Standard gives recommendations for the organization and management of assessment, stabilization, mitigation and restoration of properties, contents, facilities and assets following incident damage. This standard is intended to provide recommendations to individual damage management practitioners and organizations involved in carrying out damage management. It is applicable to domestic, commercial and public buildings. NOTE This standard might be of interest to property owners, their insurers and their respective agents; risk and business continuity managers and other interested parties identified in 0.1. Terms, definitions and abbreviations 2.1 Terms and definitions For the purposes of this British Standard, the following terms and definitions apply. 2.1.1 asbestos register pre-existing document that contains information about asbestos containing materials that have been identified within a building 2.1.2 beyond economic restoration category or item that is considered not able to be restored cost effectively when compared to the insurer’s liability or the full replacement cost 2.1.3 completion point at which agreed outcomes have been achieved 2.1.4 contractual relationship basis on which the damage management company or the damage management practitioner (DMP) is employed and remunerated 2.1.5 customer instructing party and/or the owner(s), occupier(s) or managing agent of the property (buildings and/or contents) 2.1.6 damage management management of damage to properties and contents resulting from an incident or peril NOTE Referred to by some sectors as damage restoration/disaster restoration (DR), or recovery and restoration (R&R). 2.1.7 damage management practitioner individual carrying out damage management activity 2.1.8 environmental stabilization to bring environmental conditions under control so that secondary damage is avoided or reduced, and that environmental conditions are suitable to return normal use to the property 2.1.9 handover returnin
Contents:
- Introduction
- Scope
- Annexes
- Annex A (informative) Role of insurance sector stakeholders
- Annex B (informative) Business continuity, commercial property and major
- Annex C (normative) Inspection methods and equipment
- Annex D (informative) Description of on-site health and safety
- Annex E (normative) Description of damage stabilization works
- Annex F (normative) Property damage restoration works
- Annex G (normative) Contents damage restoration works
- Annex H (normative) Damage management assurance methods
- Annex I (informative) Repair/reinstatement activity
- Annex J (informative) Stakeholder route map
- Annex K (informative) Specific incident types
- Bibliography