Methods of test for soils for civil engineering purposes-Classification tests and determination of geotechnical properties
Publishing information: This part of BS 1377 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 March 2022. It was prepared by Subcommittee B/526/3, Ground investigation and ground testing, under the authority of Technical Committee B/526, Geotechnics. A list of organizations represented on these committees can be obtained on request to their committee manager. Supersession This part of BS 1377 supersedes BS 1377‑2:1990, BS 1377‑4:1990, BS 1377‑5:1990, BS 1377‑6:1990 and BS 1377‑7:1990, which are withdrawn. Relationship with other publications BS 1377 is published in the following parts: Part 1: General requirements and sample preparation Part 2: Classification tests and determination of geotechnical properties (this document) Part 3: Chemical and electrochemical tests Part 9: In-situ tests BS 1377‑1 provides general information relating to the tests, common calibration and specification requirements and general requirements for testing laboratories and fieldwork. This information is required for tests for which no BS EN ISO standard is available. BS EN ISO 17892 standards include specific requirements for sample preparation, equipment maintenance and calibration for each test which take precedence. BS 1377‑3 describes test methods for determining the amount of chemical substances in soil and groundwater. This part of BS 1377 includes reference to BS EN ISO 17892 (all parts) for the relevant test and provides non-contradictory complementary information on the test methods.
Information about this document: This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. This part of BS 1377 consolidates the tests included in BS 1377‑2:1990, BS 1377‑4:1990, BS 1377‑5:1990, BS 1377‑6:1990 and BS 1377‑7:1990 into one document as follows: BS 1377‑2:1990, Part 2: Classification tests BS 1377‑4:1990, Part 4: Compaction-related tests BS 1377‑5:1990, Part 5: Compressibility, permeability and durability tests BS 1377‑6:1990, Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement BRITISH STANDARD BS 1377‑7:1990, Part 7: Shear strength tests (total stress) BS 1377‑8:1990, Part 8: Shear strength tests (effective stress) The following tests that were included in BS 1377:1990 have been withdrawn: BS 1377‑2:1990, Clause 6.3 Volumetric shrinkage test (definitive method) BS 1377‑2:1990, Clause 6.4 Volumetric shrinkage test (subsidiary method) BS 1377‑7:1990, Clause 9 Multistage unconsolidated undrained triaxial test
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its methods are expressed as a set of instructions, a description, or in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This part of BS 1377 specifies methods of test for the classification of soil and for the determination of geotechnical properties of soils in the laboratory. Most of these tests are required for the determination of geotechnical behaviour of soils in accordance with BS EN 1997 (all parts) and BS 5930. This part of BS 1377 includes: a) common laboratory tests required for the classification of soils; b) determination of compaction characteristics of soils for earthworks, permeability, compressibility and erodibility; and c) determination of shear strength of soils in terms of both total and effective stresses. NOTE Where EN ISO test methods are available, these are normatively referenced and commentary provided to assist in their application. BS 1377‑1 specifies requirements that include details of sample preparation and equipment calibration that are relevant to tests described in this part of BS 1377, unless otherwise detailed in the referenced BS EN ISO 17892 standard.