BS 217-1961 PDF

BS 217-1961 PDF

Specification for red lead for paints and jointing compounds

$90.17 $180.34 -50%
Publisher
isbn 0580008622
Product Code: BS 217
Stock In Stock
Published: 06/23/1961
Number of Pages: 12
File Size: 1 file, 390 KB

Available Options

Product Description

Specification for red lead for paints and jointing compounds

Scope: This British Standard applies to red lead for use in paints and jointing compounds. For the purposes of this specification, three types of red lead are specified: 2 Composition The material shall consist of red lead in the form of a dry soft powder, free from added colouring matter and other adulterants. After being dried as described in Appendix H, the material shall contain not less than 99.5 per cent by weight of oxides of lead (i.e. Pb3O4 + PbO), as determined in Appendix C. The proportions of Pb3O4 in the material, determined by the method described in Appendix A, shall be as follows: 3 Non-setting properties for Type 1 material only When Type 1 red lead is tested in the manner given in Appendix D, the paint produced shall not thicken to an extent that prevents it being brought, by simple mixing with a paddle, to a proper consistency for painting. 4 Residue on sieve The material shall not leave a residue in excess of the following limits, when tested in the manner described in Appendix E: 5 Oil absorption value The oil absorption value of the material, when determined in the manner described in Appendix F, shall be within ± 10 per cent of the oil absorption value of an agreed sample. NOTE The oil absorption value of normal commercial grades of red lead is usually between 4 and 10. 6 Colour The colour of the material shall closely match that of an agreed sample, when compared in the manner described in Appendix G. 7 Matter volatile at 100 °C The loss in weight on heating the material in the manner described in Appendix H shall not exceed 0.2 per cent by weight. 8 Matter soluble in water The material, when tested in the manner described in Appendix J, shall contain not more than 0.3 per cent by weight of matter soluble in water. 9 Sample For the purpose of examination under this specification, representative samples shall be taken at random from not less than 10 per cent of the original and previously unopened containers. The material shall be thoroughly mixed an

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 217-1961 PDF

BS 217-1961 PDF

$90.17 $180.34