BS 5656-1-2013 PDF

BS 5656-1-2013 PDF

Safety rules for the construction and installation of escalators and moving walks-Examination and test of new escalators before putting into service. Specification for means of determining compliance with BS EN 115-1:2008+A1:2010

$147.32 $294.64 -50%
Publisher
isbn 9780580814488
Product Code: BS 5656-1
Stock In Stock
Published: 11/30/2013
Number of Pages: 30
File Size: 1 file, 700 KB

Available Options

Product Description

Safety rules for the construction and installation of escalators and moving walks-Examination and test of new escalators before putting into service. Specification for means of determining compliance with BS EN 115-1:2008+A1:2010

Publishing information: This part of BS 5656 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 November 2013. It was prepared by Technical Committee MHE/4, Lifts, hoists and escalators. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession Together with BS 5656-3 (currently in preparation 1)), this part of BS 5656 will supersede BS 5656-1:1997, which will be withdrawn upon the publication of BS 5656-3. Relationship with other publications Part 1: Examination and test of new escalators before putting into service – Specification for means of determining compliance with Part 2: Code of practice for the selection, installation and location of new escalators and moving walks. This part of BS 5656 is intended to be read in conjunction with

Information about this document: This is a full revision of the standard. The principal change is to update the standard to take into account the publication of BS EN 115-1:2008+A1:2010. The Machinery Directive 2006/42/EC [1] requires the manufacturer of an escalator to take responsibility for its design and manufacture. The Directive requires that before putting an escalator into service it shall have undergone certain procedures including final inspection and test. The inspection and test procedures in this part of BS 5656 may be undertaken by the supplier or their representative, provided that they have an appropriate quality assurance system and/or can demonstrate the necessary competence to undertake the work. The level of quality assurance can vary in accordance with which conformity assessment route applies, details of which are given in BS EN ISO 9000. In order to prove the competence of the persons carrying out the testing of the escalator it is necessary that they operate in accordance with a quality assurance system monitored by a Notified Body, under the requirements of the Supply of Machinery (Safety) Regulations 2008 [2]. It might be necessary to make available certification of the quality assurance system in order to prove compliance. This part of BS 5656 specifies a means of determining compliance with BS EN 115-1:2008+A1:2010. It does not cover every clause in BS EN 115-1:2008+A1:2010 as many requirements are covered by the manufacturer’s quality control procedures. 1) At the time of publication of this part of BS 5656, it is expected that a new part 3 will be developed to cover the examination and test of moving walks before putting into service. BS 5656-1:1997 will remain current until the specifications for both escalators and moving walks have been revised. This part of BS 5656 covers the tests in BS EN 115-1:2008+A1:2010, 7.3, as well as tests that do not fall within the manufacturer’s quality control system; for example, the surroundings of the escalator to ensure conformity to arrangement drawings.

Use of this document: It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced. Attention is particularly drawn to the recommendations for safe working practices provided in BS 7801. BSI permits the reproduction of the tables in this part of BS 5656. This reproduction is only permitted where it is necessary for the user to record findings on the tables during each application of the standard. The following documents are required for the examination and tests to be carried out: general arrangement drawing; electrical schematic drawing; copies of test certificates; Notified Body approvals, certificates of incorporation, certificates of conformity (if applicable); risk assessments for deviations from BS EN 115-1:2008+A1:2010 (if any). This part of BS 5656 is not intended to be used for existing installations, for which the relevant test procedures are those that were applicable at the time of installation. BS 5656-1:1997 may still be used to carry out any examinations or testing required when changes are made to escalators installed in conformity to BS EN 115:1995, BS EN 115:1995 incorporating Amendment No. 1 (5.1.5.8 pertaining to hand rails) and BS EN 115:1995 incorporating Amendment No. 2 (5.1.5.6.3 pertaining to deflector devices). Relevant tests from this part of BS 5656 may be applied to existing escalators that are upgraded in accordance with either BS EN 115-1:2008+A1:2010 or BS EN 115-2, where for example, components are fitted that were not available at the time of installation and which require examination and test, e.g. the installation of deflector devices. Although this standard specifically addresses conformity with BS EN 115-1:2008+A1:2010, it also includes provisions for the testing of other commonly installed features on new escalators, e.g. comb lighting.

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. It is recognized that certain tests/checks can be carried out more effectively before installation, and that others should only be made on site. Answer boxes in this part of BS 5656 that contain a shaded square imply that the test should be carried out on site.

Scope: This part of BS 5656 specifies one means of determining compliance with the provisions for examination, testing and recording results for new escalators specified in BS EN 115-1:2008+A1:2010, before putting into service.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 5656-1-2013 PDF

BS 5656-1-2013 PDF

$147.32 $294.64