BS 8484-2022 PDF
Provision of lone worker services. Code of practice
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ACI-American Concrete Institute
- ANSI-American National Standards Institute
- API-American Petroleum Institute
- AS-Standards Australia
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASME-ASME International
- ASTM-ASTM International
- AWS-American Welding Society
- AWWA-American Water Works Association
- BS-BSI Group
- ISO-International Organization for Standardization
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- SAE-SAE International
- UL-Underwriters Laboratories
- UNE-Asociación Española de Normalización
Your shopping cart is empty!
Product Description
Provision of lone worker services. Code of practice
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 March 2022. It was prepared by Subcommittee GW/1/-/2, Protection of lone workers, under the authority of Technical Committee GW/1, Electronic security systems and products. A list of organizations represented on these committees can be obtained on request to the committee manager. Supersession This British Standard supersedes BS 8484:2016, which will be withdrawn on 31 March 2023. Relationship with other publications During the review of this British Standard, alignment to BS 10800:2020 was considered. Due to BS 10800:2020 predominantly relating to the security services sector and its content not applying to the provision of lone worker services, alignment to BS 10800:2020 was not appropriate to this revision. At the time of publication, there are several standards for alarm receiving centres (ARCs) available: the BS EN 50518 series; As a result of the publication of the BS EN 50518 series, BS 5979:2007 was withdrawn, but suppliers might choose to continue using ARCs which conform to BS 5979:2007.
Information about this document: This is a full revision of the standard, and introduces the following principal changes: acknowledgement that pairs or small groups of workers might also be considered “at risk” and so the use of a lone worker service (LWS) might be beneficial; home workers now included as potential beneficiaries of an LWS as well as pairs or small groups; acknowledgment that those working from home are also to be considered as lone workers and therefore understanding their risks and the possible use of an LWS might be beneficial; content updated to assume that the method used to transfer an audio call from a lone worker (LW) might be via a data call rather than a traditional call; improvement to integrity with the addition that all staff involved in LWS delivery are to be screened in accordance with BS 7858; and removal of most of the recommendations in Clause 7 (Alarm Receiving Centre) and acknowledgement that this is now covered in BS 9518. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. ii © THE BRITISH STANDARDS INSTITUTION 2022 – ALL RIGHTS RESERVED
Use of this document: As a code of practice, this British Standard takes the form of recommendations and guidance. It is not to be quoted as if it were a specification. Users are expected to ensure that claims of compliance are not misleading. Users may substitute any of the recommendations in this British Standard with practices of equivalent or better outcome. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”).
Scope: This British Standard gives recommendations for the provision of safety and security for employees in a lone working scenario where the customer’s risk profile identifies the need for an LWS. This British Standard gives recommendations for the provision of LWSs to help control and manage identified LW risks. Such services consist of an LWD and/or an LWA, monitoring, training, management information and response options. 2 © THE BRITISH STANDARDS INSTITUTION 2022 – ALL RIGHTS RESERVED This British Standard also gives recommendations for the following: a) minimizing false alarms; b) managing low level genuine incidents that do not require an immediate physical response such that they are treated accordingly; and c) maximizing continual engagement from customers and lone workers of the LWS. This British Standard provides a customer with recommendations and a benchmark when seeking a solution to reduce and/or eliminate the risk to staff operating in situations where colleagues are unable to provide direct or immediate assistance. In such circumstances, an LWS solution provides a proportional response, including, where required, a response from the police and/or other response services. The monitoring of LWSs is excluded from the scope as this is covered in BS 9518. This British Standard is applicable to both suppliers and customers procuring LWSs. NOTE See Figure 1 for an example of how an LWS fits into an LW policy.



