BS 8500-1-2023 PDF

BS 8500-1-2023 PDF

Concrete. Complementary British Standard to BS EN 206-Method of specifying and guidance for the specifier

$220.98 $441.96 -50%
Publisher
isbn 9780539263497
Product Code: BS 8500-1
Stock In Stock
Published: 11/17/2023
Number of Pages: 78
File Size: 1 file, 3.4 MB

Available Options

Product Description

Concrete. Complementary British Standard to BS EN 206-Method of specifying and guidance for the specifier

Publishing information: This part of BS 8500 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 30 November 2023. It was prepared by Working Group B/517/1/WG20, Specification drafting, under the authority of Subcommittee B/517/1, Concrete production and testing, and Technical Committee B/517, Concrete and related products. A list of organizations represented on this committee can be obtained on request to the committee manager. Supersession This part of BS 8500 supersedes BS 8500-1:2015+A2:2019, which is withdrawn. Relationship with other publications BS 8500 contains additional United Kingdom provisions to be used in conjunction with BS EN 206:2013+A2:2021. Together they form a complete package for the specification, production and conformity of concrete. BS 8500 is published in the following parts: Part 1: Method of specifying and guidance for the specifier; and Part 2: Specification for constituent materials and concrete.

Information about this document: This new edition of BS 8500-1 incorporates technical changes only. It does not represent a full review or revision of the document, which will be undertaken in due course. The principal changes are: the inclusion of BS EN 197-5 cements and their equivalent combinations as general purpose cements; the introduction of the combined performance category for cements and combinations, which categorizes these by their resistance to sulfate attack and chloride ingress; the removal of minimum cement content and water/cement ratio as limiting values for resistance to corrosion of reinforcement due to carbonation; the removal of strength as a limiting value for resistance to corrosion of reinforcement due to chloride ingress; a revision of Table A.6 to allow easier specification of the increased number of cements and combinations for durability; improved guidance on identity testing; the identity testing strength criteria for lower strength concrete to align with BS EN 13791; improved guidance on consistence retention; guidance on digital monitoring and measurement; indicative strengths from cements and combinations; corrections and minor clarifications; and all references have been updated. The changes are predominantly concerned with the increased range of cementitious materials, their durability and categorization. The 2021 edition of BS EN 197‑5 introduced multi-component cements BRITISH STANDARD with a lower proportion of clinker than that allowable by BS EN 197-1. Concretes containing varying proportions of Portland cement clinker, ggbs and limestone fines; and Portland cement clinker, pfa and limestone fines were tested for carbonation, chloride ingress, resistance to sulfate attack, ASR, dimensional stability and freeze/thaw. The results were compared to reference CEM I, CEM II/B-V and CEM III/A concretes and the performance of the cements or combinations associated with the tested proportions categorized accordingly. The introduction of combined performance categories which group cements and their equivalent combinations by resistance to sulfate attack and by chloride migration coefficient allows easier comparison between familiar cements and those introduced in this part of BS 8500 when specifying concrete. This concept also gives a route for the acceptance of new cements and combinations that are not currently included and means that their introduction can be through a relatively simple amendment to the standard and not a full revision. It has been accepted that the compressive strength of concrete is not a limiting factor for the durability of reinforced concrete when exposed to chlorides, and so the recommended strength class has been removed for concrete in XD and XS exposure conditions. As these strength classes were being used by specifiers as a guide to the strength that might be expected from a minimum cement content or water/cement ratio, new guidance has been provided. It is acknowledged that for a particular cement or combination, the factor that controls the rate of carbonation is water/cement ratio. This is problematic when trying to set limiting values for a wide range of cements and combinations. It was noted and agreed that compressive strength is a good proxy for resistance to carbonation and so strength for all cements and combinations is the only limiting value for resistance to corrosion through carbonation so simplifying specification. This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. Hazard warning WARNING. Where skin is in contact with fresh concrete, skin irritations are likely to occur owing to the alkaline nature of cement. The abrasive effects of sand and aggregate in the concrete can aggravate the condition. Potential effects range from dry skin, irritant contact dermatitis, to – in cases of prolonged exposure – severe burns. Take precautions to avoid dry cement entering the eyes, mouth and nose when mixing mortar or concrete by wearing suitable protective clothing. Take care to prevent fresh concrete from entering boots and use working methods that do not require personnel to kneel in fresh concrete. Unlike heat burns, cement burns might not be felt until some time after contact with fresh concrete, so there might be no warning of damage occurring. If cement or concrete enters the eye, immediately wash it out thoroughly with clean water and seek medical treatment without delay. Wash wet concrete off the skin immediately. Barrier creams can be used to supplement protective clothing but are not an alternative means of protection.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 8500-1-2023 PDF

BS 8500-1-2023 PDF

$220.98 $441.96