BS 8580-2-2022 PDF
Water quality-Risk assessments for Pseudomonas aeruginosa and other waterborne pathogens. Code of practice
- AA-The Aluminum Association
- AAMI-Association for the Advancement of Medical Instrumentation
- AASHTO-American Association of State Highway and Transportation Officials
- AATCC-American Association of Textile Chemists and Colorists
- ACI-American Concrete Institute
- ANSI-American National Standards Institute
- API-American Petroleum Institute
- AS-Standards Australia
- ASABE-American Society of Agricultural and Biological Engineers (Formerly ASAE)
- ASCE-American Society of Civil Engineers
- ASHRAE-American Society of Heating, Refrigerating, and Air Conditioning Engineers
- ASME-ASME International
- ASTM-ASTM International
- AWS-American Welding Society
- AWWA-American Water Works Association
- BS-BSI Group
- ISO-International Organization for Standardization
- IEC-International Electrotechnical Commission
- IEEE-Institute of Electrical and Electronics Engineers
- SAE-SAE International
- UL-Underwriters Laboratories
- UNE-Asociación Española de Normalización
Your shopping cart is empty!
Product Description
Water quality-Risk assessments for Pseudomonas aeruginosa and other waterborne pathogens. Code of practice
Publishing information: This part of BS 8580 is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 January 2022. It was prepared by Subcommittee EH/3/4, Microbiological methods, under the authority of Technical Committee EH/3, Water quality. A list of organizations represented on these committees can be obtained on request to the committee manager. Relationship with other publications This standard is part of a series, BS 8580, which includes the following parts: BS 8580‑1, Water quality – Risk assessments for Legionella control – Code of practice BS 8580‑2, Water quality – Part 2: Risk assessments for Pseudomonas aeruginosa and other waterborne pathogens – Code of practice This British Standard is intended to be used in conjunction with BS 8680.
Information about this document: This publication can be withdrawn, revised, partially superseded or superseded. Information regarding the status of this publication can be found in the Standards Catalogue on the BSI website at bsigroup.com/standards, or by contacting the Customer Services team. Where websites and webpages have been cited, they are provided for ease of reference and are correct at the time of publication. The location of a webpage or website, or its contents, cannot be guaranteed. This standard is intended for use in healthcare by Water Safety Groups (WSGs) including by, Authorising Engineer/Independent Advisers (see HTM 04-01 [1] and other relevant national health technical memoranda), Responsible Person(s), infection prevention and control professionals, microbiologists, contractors and service providers including, patient support services etc. It is also relevant to those providing specialist clinical services, for example, cardiology, dental, audiology, dialysis and aquatic therapy. On non-healthcare sites, this British Standard is intended to be used by WSGs, Responsible Person(s) and all relevant advisors, contractors, service providers and suppliers.
Use of this document: As a code of practice, this British Standard takes the form of recommendations and guidance. It is not to be quoted as if it were a specification. Users are expected to ensure that claims of compliance are not misleading. Users may substitute any of the recommendations in this British Standard with practices of equivalent or better outcome. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this part of BS 8580 that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. iv © THE BRITISH STANDARDS INSTITUTION 2021 – ALL RIGHTS RESERVED Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”). The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.
Scope: This British Standard gives recommendations and guidance on how to carry out risk assessments for Pseudomonas aeruginosa (PA) and other waterborne pathogens whose natural habitat is within constructed water systems and the aqueous environment (autochthonous) rather than those being present as a result of a contamination event. It includes those pathogens that can colonize and grow within water systems and the associated environment. It does not cover risk assessments for Legionella spp.; these are covered in BS 8580‑1, or risk assessments for enteric microorganisms derived from human or animal faecal contamination or sewage ingress. This British Standard is especially applicable to all types of healthcare provision, including hospitals, care, nursing and residential homes, together with other settings such as educational, travel, leisure, commercial, industrial, where there are additional systems or equipment which could pose a risk from waterborne pathogens. It is also applicable to spa baths, hot tubs, pools, and other equipment, including the use of large inflatable equipment in swimming pools. Premises where this standard can be used include the educational, travel, industrial, leisure and beauty sector, including health spas, nail bars and tattoo parlours, and other premises where water systems and associated equipment can pose a risk of infection from waterborne pathogens other than Legionella and those associated with gastrointestinal infections. This British Standard covers risk assessment of distributed water systems and associated equipment, system components and fittings as well as above ground drainage systems. It takes account of all relevant environmental and clinical factors, aspects of human behaviour leading to contamination events, e.g. poor cleaning and storage techniques and all possible modes of transmission. It also takes into account risk factors within the associated environment, such as the potential for transmission from personnel, splashin



