Code of practice for safe working on lifting platforms
Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 28 February 2014. It was prepared by Technical Committee MHE/4, Lifts, hoists and escalators. A list of organizations represented on this committee can be obtained on request to its secretary.
Information about this document: This is a new British Standard which gives recommendations for safe working on lifting platforms. The standard is supported by the following annexes: Annex A shows some typical safety signs; Annex B is concerned with the wellbeing of persons working alone; Annex C describes electrical working.
Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it was a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.
Presentational conventions: The provisions in this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.
Scope: This British Standard gives recommendations for safe working practices (supported by training) for: owners of permanently installed lifting platforms serving defined landing levels; persons having effective control of the premises where such lifting platforms are installed; persons responsible for, and involved in, the design, installation, thorough examination, inspection, testing, service, maintenance, repair and dismantling of such lifting platforms. This British Standard gives recommendations for the safety of persons when gaining access to and from the area in which a lifting platform is installed and whilst working there. The recommendations also relate to the safety of others present in the vicinity, whether they are working or not, who could be endangered by the actions of those working on lifting platforms. NOTE 1 Hazards in work areas might vary, e.g. in occupied/unoccupied buildings, premises being refurbished, construction sites and industrial environments. This British Standard is applicable to persons working on lifting platforms constructed to conform to BS 5900:2012, BS 6440:2011 and BS EN 81-41:2010. NOTE 2 Lifting platforms conforming to BS 5900 are powered homelifts with partially enclosed carriers and no liftway enclosures. Lifting platforms conforming to BS 6440 have non-enclosed or partially enclosed liftways and non-enclosed or partially enclosed carriers. Lifting platforms conforming to BS EN 81-41 have enclosed liftways and carriers that are not completely enclosed. This British Standard is not directly applicable to persons working on other types of lifting platform, but the recommendations may be taken as a useful guide for such lifting platforms. This British Standard does not cover: stair lifts; lifts designed under the Lifts Regulations 1997 [1]; vertical lifting appliances with an enclosed carrier (“slow speed lifts”) designed under the Supply of Machinery (Safety) Regulations 2008 [2]; NOTE 3 There are lifting appliances that feature
Contents:
- Foreword
- Scope
- Annexes
- Annex A (informative) Typical safety signs
- Annex B (normative) Wellbeing of persons working alone
- Annex C (normative) Electrical working
- Bibliography