BS 9266-2013 PDF

BS 9266-2013 PDF

Design of accessible and adaptable general needs housing. Code of practice

$102.87 $205.74 -50%
Publisher
isbn 9780580720246
Product Code: BS 9266
Stock In Stock
Published: 07/31/2013
Number of Pages: 46
File Size: 1 file, 810 KB

Available Options

Product Description

Design of accessible and adaptable general needs housing. Code of practice

Publishing information: This British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 July 2013. It was prepared by Technical Committee B/559, Access to buildings for disabled people. A list of organizations represented on this committee can be obtained on request to its secretary. Supersession This British Standard supersedes DD 266:2007, which is withdrawn. Relationship with other publications This British Standard supplements BS 8300:2009+A1, which, although it incorporates certain recommendations on dwellings into the general guidance, does not feature housing as a building type, but is concerned mainly with public, commercial and service buildings. BS 9266 provides advice on the design of accessible and adaptable general needs housing and has drawn on a number of sources including the criteria from the Lifetime homes design guide [1] and the government document Lifetime Homes, Lifetime Neighbourhoods [2]. For more information on the 16 lifetime homes criteria, refer to www.lifetimehomes.org.uk 1). BS 9266 is concerned largely with access to and within, and use of, residential buildings. Recommendations for means of escape in the event of fire, and for fire safety generally, are given in BS 9999 and BS 9991.

Information about this document: This document converts DD 266 into a full British Standard. It is a full revision of the Draft for Development, and incorporates the following principal changes: change of title and clarification of scope; significant restructure of the document; general revision to take into account other recent guidance, including revised recommendations for stairs and ramps; revised recommendations for lifts; revised and simplified recommendations for bathrooms and WCs; additional guidance on lighting. Much new housing in Britain is widely recognized to be spatially constrained. The recommendations in this standard have been developed in the light of these constraints, and in the knowledge that households might have to make compromises (e.g. reducing furniture), to accommodate family members who have developed or acquired temporary or permanent impairments. With reasonable space and careful attention to the design of kitchens, bathrooms, and the amount and location of storage space, homes designed in accordance with BS 9266 might be suitable for some wheelchair users. However, many wheelchair users and some older people with particular access, storage and circulation needs might need the space and circulation standards of a home designed in accordance with the Wheelchair housing design guide [3]. 1) Last accessed 25 July 2013.

Use of this document: As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.

Presentational conventions: The provisions in this standard are presented in roman (i.e. upright) type. Its recommendations are expressed in sentences in which the principal auxiliary verb is “should”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. The word “should” is used to express recommendations of this standard. The word “may” is used in the text to express permissibility, e.g. as an alternative to the primary recommendation of the clause. The word “can” is used to express possibility, e.g. a consequence of an action or an event. Notes and commentaries are provided throughout the text of this standard. Notes give references and additional information that are important but do not form part of the recommendations. Commentaries give background information.

Scope: This British Standard gives recommendations for the design of accessible and adaptable general needs housing, whether in the form of flats or individual houses. It covers car parking, external access routes to blocks of flats or individual houses, common circulation areas in blocks of flats, circulation areas within dwellings, and the provision of key rooms and facilities. This British Standard is intended to be used for new dwellings that are designed to be accessible and adaptable. The recommendations can also be used for assessing the accessibility and adaptability of existing dwellings and, where practicable, as a basis for their improvement. The extent to which the recommendations apply to renovations, refurbishments and conversions (including listed and historic buildings) is determined on a case-by-case basis. This British Standard does not cover the design of public buildings, which are covered in BS 8300:2009+A1. It does not cover purpose-designed wheelchair housing, purpose-designed housing for older people such as “extra care”, “close care”, “assisted living” etc., or other types of housing which include assistance or care facilities. This British Standard does not provide comprehensive advice on the external environment.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS 9266-2013 PDF

BS 9266-2013 PDF

$102.87 $205.74