BS +AU 148-2-1969 PDF

BS +AU 148-2-1969 PDF

Methods of test for motor vehicle paints-Resistance to continuous salt spray

$90.17 $180.34 -50%
Publisher
isbn 0580052389
Product Code: BS +AU 148-2
Stock In Stock
Published: 03/31/1969
Number of Pages: 12
File Size: 1 file, 450 KB

Available Options

Product Description

Methods of test for motor vehicle paints-Resistance to continuous salt spray

Scope: 1.1 This Part of this British Standard describes a procedure for determining the resistance of paint films to a continuous salt fog environment. Two test conditions, differing only in temperature of operation, are given: 1.2 The standard does not prescribe periods of test, nor the interpretation to be given to the results. 2 Correlation and limitations of test In order to obtain good reproducibility between laboratories, it is necessary to observe the recommended operating conditions, correct spacing of and positioning of specimens and to ensure suitable siting of equipment. Suitable forms of equipment which may be used to obtain the required conditions are referred in 5.1. Results from other designs of equipment have been found to correlate and such equipment may be used, subject to agreement between the purchaser and the supplier. 3 Supplementary information The following supplementary information, together with reference to appropriate standards where applicable, is required in order to carry out the tests described in this standard: 1) Type of coating or coatings. 2) Nature of substrate and method of preparation. 3) Method of application of test coating or coatings to substrate. 4) Thickness and/or weight of coating, or of individual coatings in the case of multicoat systems. 5) Duration and conditions of drying of the coated specimen (or condition of stoving, if applicable) before testing. 6) Required duration of test and test conditions (T25 or T35). 7) How inspection of the tested coating is to be made and what characteristics are to be considered in evaluating its resistance to this test. 4 Test specimens 4.1 Specimens for test will generally be panels prepared and coated with the materials to be tested, but for some purposes (for example quality control tests) painted components, or suitable portions of them, may be required. Where components are to be tested it is important to select samples which are free from accidental damage. If this is impracticable,

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS +AU 148-2-1969 PDF

BS +AU 148-2-1969 PDF

$90.17 $180.34