BS +AU 148-5-1969 PDF

BS +AU 148-5-1969 PDF

Methods of test for motor vehicle paints-Gloss measurement

$90.17 $180.34 -50%
Publisher
isbn 0580052583
Product Code: BS +AU 148-5
Stock In Stock
Published: 03/31/1969
Number of Pages: 10
File Size: 1 file, 380 KB

Available Options

Product Description

Methods of test for motor vehicle paints-Gloss measurement

Scope: This Part of this British Standard describes methods of carrying out tests for specular reflection value and image clarity for paints for motor vehicles. General requirements are given and the necessary apparatus specified. 2 Test panels Panels, 150 mm × 100 mm or other convenient size, specified and pretreated in accordance with the requirements of BS 3900, Part A32) (note particularly Clause 2.2) shall be coated in accordance with the requirements of BS 3900, Part A42), with the paint system to be tested. Normally steel panels are used but it may be appropriate to use other substrates. Particular care shall be taken to ensure that the panels are flat and that the paint film is free from blemishes such as ridges, flatting lines, dirt, “orange peel” effect, etc. The panels shall be aged, under normal laboratory conditions for 7 days unless otherwise agreed. 3 Test no.1. specular reflection value 3.1 General. The test for specular reflection value shall be carried out generally in accordance with BS 3900, Part D23), which specifies a 45° incident angle. However, as the angle of 45° is not so discriminating at high gloss levels as the 20° angle, this standard also provides for the use of variable angle instruments. Any angle other than 45° shall be the subject of agreement between the paint supplier and the purchaser. It should be noted that the incident angle referred to in this standard is the angle formed between the beam of incident light and the perpendicular to the panel at the point of incidence. This test method shall be used for all reference test purposes. 3.2 Procedure. The test shall be carried out in accordance with BS 3900, Part D24) except that: 1) The galvanometer scale shall be set to 80 with reference to the standard black tile. This permits the convenient expression of gloss values higher than that of the reference tile. 2) When an angle other than 45° is used, a variable angle gloss head shall be set at the required angle. 4 Test no.2. assessment b

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS +AU 148-5-1969 PDF

BS +AU 148-5-1969 PDF

$90.17 $180.34