Methods of test for motor vehicle paints-Resistance to dry heat
Scope: This Part of this British Standard describes two methods of test to assess the resistance of a paint film to dry heat, such as is encountered in the engine compartment of a motor vehicle. The moderate temperature test is suitable for parts used in rocker covers, crankcases, etc, whilst the high temperature test covers paints for exhaust manifolds, hot spot plates etc. 2 Preparation of test panels 2.1 Panels, 150 mm × 100 mm, or other convenient size, specified and pretreated in accordance with the requirements of BS 3900, Part A32) (note particularly Clause 2.2), shall be coated in accordance with the requirements of BS 3900, Part A42) with the paint system to be tested. Normally, steel panels are used, but it may be appropriate to use other substrates, e.g. castings. 2.2 Panels shall be aged, under normal laboratory conditions, for 24 h before testing, unless otherwise agreed. 3 Test methods 3.1 Moderate temperature test. The test panel shall be placed in an air-circulating oven and maintained at 100 ± 2 °C for 72 h. At the end of this period and after cooling, the panel shall be examined for change in colour, adhesion and flexibility by the methods described in Parts 1 and 33) of this standard. 3.2 High temperature test 3.2.1 The panel shall be weighed before painting and again after painting and ageing. The weight of the film shall then be calculated by the methods described in Parts 14) and 33) of this standard. 3.2.2 It shall be subjected to 3 cycles of test, each consisting of: 1) 8 h at 260 ± 5 °C in an air circulating oven. Temperatures other than 260 °C may be used by arrangement between the purchaser and the supplier. 2) 16 h at room temperature. 3.2.3 On completion of the 3 cycles, the test panel shall be reweighed and the loss in weight of the paint film calculated. The panel shall be examined for loss of adhesion and deterioration in appearance. 2) BS 3900, “Methods of test for paints”, Part A3, “Preparation of panels prior to painting”, Part A4, “Notes
Contents: