Specification for dimensional codes for passenger cars
Scope: This British Standard specifies the codes to be used for dimensional data relating to passenger cars (see 3.1) and their derivatives. 2 References The following standards publications are referred to in this standard. BS AU 173, Definitions for a three-dimensional reference system and fiducial marks. ISO 1176, Road vehicles — Weights — Vocabulary. ISO 3832, Road vehicles — Luggage compartments of passenger cars — Method of measuring the reference volume. ISO 4131, Road vehicles — Dimensional codes for passenger cars. 3 Definitions NOTE Throughout this British Standard, unless otherwise stated, the supporting surface is assumed to be horizontal, lengths and widths are measured in a horizontal plane, and heights are measured in a vertical plane. For the purposes of this British Standard, the following general definitions and the particular definitions in clauses 5, 6 and 7 apply. 3.1 passenger car a motor vehicle intended primarily for carrying persons and their goods and having a maximum of nine seating places including the driving seat 3.2 Loading conditions 3.2.1 design load unless otherwise defined by the manufacturer, the kerb weight (including the spare wheel and any accessory equipment) plus 68 kg per passenger distributed as follows 3.2.2 kerb weight the complete vehicle kerb weight as defined in ISO 1176 3.2.3 maximum weight the maximum authorized total weight as defined in ISO 1176 3.3 zero X, Y and Z planes see BS AU 173 3.4 x-, y- and z- planes planes parallel to the zero X, Y and Z planes respectively Number of seating positions Number of passengers Distribution 2 and 3 2 in the front seats 4 and 5 2 in the front seats 1 in the back seats 6 and 7 2 in the front seats 2 in the extreme back seats 8 and 9 2 in the front seats 3 in the extreme back seats or, when the rear row of seats has only 2 seating positions, 2 in that row and 1 in the second row from the rear