BS PAS 8820-2016 PDF

BS PAS 8820-2016 PDF

Construction materials. Alkali-activated cementitious material and concrete. Specification

$90.17 $180.34 -50%
Publisher
isbn 9780580891489
Product Code: BS PAS 8820
Stock In Stock
Published: 04/30/2016
Number of Pages: 58
File Size: 1 file, 2.3 MB

Available Options

Product Description

Construction materials. Alkali-activated cementitious material and concrete. Specification

Publishing information: This PAS was sponsored by High Speed Two Ltd. Its development was facilitated by BSI Standards Limited and it was published under licence from The British Standards Institution. It came into effect on 30 April 2016. This PAS was co-funded by David Ball Group Ltd and Hanson UK. Acknow- ledgement is given to Nigel Fraser, Professor John Provis and Professor Paul Lambert as the technical authors, and the following organizations that were involved in the development of this PAS as members of the steering group: Banah UK BASF Building Research Establishment Ltd CEMEX C-Probe Systems Ltd David Ball Group Ltd Environment Agency Hanson UK Highways England High Speed Two Ltd Mott MacDonald Robery Forensic Engineering Ltd Shay Murtagh Precast Ltd Sika Ltd Transport Research Laboratory The University of Sheffield West One Management Consulting Ltd Co-opted members Acknowledgement is also given to the members of a wider review panel who were consulted in the development of this PAS. The British Standards Institution retains ownership and copyright of this PAS. BSI Standards Limited as the publisher of the PAS reserves the right to withdraw or amend this PAS on receipt of authoritative advice that it is appropriate to do so. This PAS will be reviewed at intervals not exceeding two years, and any amendments arising from the review will be published as an amended PAS and publicized in Update Standards. This PAS is not to be regarded as a British Standard. It will be withdrawn upon publication of its content in, or as, a British Standard. The PAS process enables a specification to be rapidly developed in order to fulfil an immediate need in industry. A PAS can be considered for further development as a British Standard, or constitute part of the UK input into the development of a European or International Standard. Figure B.1 is taken from BS EN 60812:2006. The complete British Standard can be purchased from the BSI online shop: http://shop.bsigroup.com/ProductDetail/? pid=000000000030101028 Hazard warnings WARNING. This PAS calls for the use of substances and/or procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. Product certification/inspection/testing Users of this PAS are advised to consider the desirability of third-party certification/‌inspection/testing of product conformity with this PAS. Users seeking assistance in identifying appropriate conformity assessment bodies or schemes may ask BSI to forward their enquiries to the relevant organizations. Assessed capability Users of this PAS are advised to consider the desirability of quality system assessment and registration against the appropriate standard in the BS EN ISO 9000 series by an accredited third-party certification body. Test laboratory accreditation Users of this PAS are advised to consider the desirability of selecting test laboratories that are accredited to BS EN ISO/IEC 17025 by a national or international accreditation body.

Use of this document: It has been assumed in the preparation of this PAS that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.

Presentational conventions: The provisions of this PAS are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element. Where words have alternative spellings, the preferred spelling of the Shorter Oxford English Dictionary is used (e.g. “organization” rather than “organisation”). Requirements in this PAS are drafted in accordance with Rules for the structure and drafting of UK standards, sub-clause J.1.1, which states, “Requirements should be expressed using wording such as: ‘When tested as described in Annex A, the product shall ...’”. This means that only those products that are capable of passing the specified test will be deemed to conform to this PAS.

Scope: This PAS specifies the performance requirements for alkali-activated cementitious material comprising aluminosilicate main constituents and an alkali activator. An AACM (including the activator) may contain Portland cement only at a content of less than 5% mass of binder solids, and may contain subsidiary constituents not exceeding 25% of the mass of the cementitious material. It also specifies a means of assessing concrete obtained through the use of such cementitious material for performance and durability, and sets requirements for the alkali-activating component and the aluminosilicate powder component of these concretes. NOTE 1 The term ”geopolymer” is not used in this PAS, but this does not exclude its use for descriptive purposes in conjunction with alkali-activated cementitious materials. This PAS does not: set detailed requirements for the composition of the alkali-activated cementitious material; specifically address applications for such materials as renders, screeds, mortars or repair materials, although it does not exclude the possibility that such materials could be used for such purposes; or cover the use of any material classified as hazardous waste. NOTE 2 Hazardous waste is defined in the Technical Guidance of the UK Environment Agency (https://www.gov.uk/how-to-classify-different-types-of-waste) and includes radioactive materials [16]. This PAS is for use by manufacturers of alkali-activated cementitious material, producers of prefabricated concrete elements containing alkali-activated cementitious material and producers of concrete containing alkali-activated cementitious material which is to be precast, delivered ready-mixed, or mixed in situ. It is also of interest to designers and specifiers as it provides a means of assessing the suitability of AACM concrete mixtures for typical construction uses. NOTE 3 Attention is drawn to The Personal Protective Equipment Regulations 2002 [9] and The Health and Safety at Work etc Act 1974 [8].

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PAS 8820-2016 PDF

BS PAS 8820-2016 PDF

$90.17 $180.34