BS PAS 67-2013 PDF

BS PAS 67-2013 PDF

Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating dwellings

$85.09 $170.18 -50%
Publisher
isbn 9780580837104
Product Code: BS PAS 67
Stock In Stock
Published: 07/02/2013
Number of Pages: 70
File Size: 1 file, 920 KB

Available Options

Product Description

Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating dwellings

Publishing information: This PAS was sponsored by the Energy Saving Trust (EST). Its development was facilitated by BSI Standards Limited and it was published under licence from The British Standards Institution. It came into effect on 28 June 2013. The technical authorship has been undertaken by Gastec at CRE Ltd through a development process managed by the EST, with original sponsorship from the Department for Environment, Food, and Rural Affairs (Defra) through the Housing Energy Efficiency Best Practice Programme which is operated by the EST. Acknowledgement is given to the following organizations that have been instrumental in the development of this specification. Baxi Heating UK Limited trading as Heateam Bosch Building Research Establishment (BRE) Ceramic Fuel Cells Ceres Power Combined Heat and Power Association (CHPA) Department of Energy and Climate Change (DECC) E.ON Energetix Genlec Energy Saving Trust (EST) Gastec UK Heating and Hot Water Industry Council (HHIC) Wider comments from other interested parties were invited by BSI. The expert contributions made by the individuals and organizations consulted in the development of this PAS are gratefully acknowledged. The British Standards Institution retains ownership and copyright of this PAS. BSI Standards Limited as the publisher of the PAS reserves the right to withdraw or amend this PAS on receipt of authoritative advice that it is appropriate to do so. This PAS will be reviewed at intervals not exceeding two years, and any amendments arising from the review will be published as an amended PAS and publicized in Update Standards. This PAS is not to be regarded as a British Standard. It will be withdrawn upon publication of its content in, or as, a British Standard. The PAS process enables a specification to be rapidly developed in order to fulfil an immediate need in industry. A PAS may be considered for further development as a British Standard, or constitute part of the UK input into the development of a European or International Standard. Supersession This PAS supersedes PAS 67:2008, which is withdrawn.

Use of this document: It has been assumed in the preparation of this British Standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced. iv • © The British Standards Institution 2013

Presentational conventions: The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”. Commentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.

Scope: This PAS specifies a set of test conditions for determining the heating and electrical performance of heat-led micro-cogeneration packages that are primarily intended for use in dwellings. The PAS is applicable for: testing micro-cogeneration packages that provide space and water heating with a thermal output up to 70 kW (252 MJ/h); or testing micro-cogeneration units (MCGs) designed to produce electricity and simultaneously heat a domestic hot water storage tank (DHWPK). The full output test might also be suitable for packages up to 400 kW (1 440 MJ/h). This PAS also specifies a reporting format (Results Tables) for the test results. This PAS does not cover how to evaluate the annual energy performance of a MCG, but it is intended that the data obtained through testing to PAS 67 can be used for these purposes. NOTE 1 A suitable method that can be used to evaluate the annual energy performance of a MCG is given in Method to evaluate the annual energy performance of micro-cogeneration heating systems in dwellings [1]. This method treats the DHW load as additional space heating load. This enables the estimation of the annual energy performance and derivation of the single index of performance for product comparison. NOTE 2 An estimate of annual energy performance is necessary for the SAP (The UK Government’s Standard Assessment Procedure for Energy Rating of Dwellings) [4] and

Contents:

  • Annexes
  • Annex A (normative) Typical arrangements for micro-cogeneration packages 49
  • Annex B (informative) Method to determine case losses 54
  • Annex C (informative) Direct method of measuring the energy loss from exhaust

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PAS 67-2013 PDF

BS PAS 67-2013 PDF

$85.09 $170.18