BS PD CEN/TR 14788-2006 PDF

BS PD CEN/TR 14788-2006 PDF

Ventilation for buildings. Design and dimensioning of residential ventilation systems

$204.47 $408.94 -50%
Publisher
isbn 0580484327
Product Code: BS PD CEN/TR 14788
Stock In Stock
Published: 05/31/2006
Number of Pages: 64
File Size: 1 file, 900 KB

Available Options

Product Description

Ventilation for buildings. Design and dimensioning of residential ventilation systems

Scope: This Technical Report specifies recommendations for the performance and design of ventilation systems which serve single family, multi family and apartment type dwellings during both summer and winter. It is of particular interest to architects, designers, builders and those involved with implementing national, regional and local regulations and standards. Four basic ventilation strategies are covered; natural ventilation, fan assisted supply air ventilation, fan assisted exhaust air ventilation and fan assisted balanced air ventilation. Combinations of these systems are not excluded and a ventilation system may serve only one dwelling (individual system) or more than one dwelling (central system). The ventilation aspects of combined systems (ventilation with heating and/or cooling) are covered. The ventilation of garages, common spaces, roof voids, sub-floor voids, wall cavities and other spaces in the structure, under, over or around the living space are not covered. Ventilation systems covered by this Technical Report may affect the entry and dilution of radon and other gases from the ground but these effects are not covered in this Technical Report. Ventilation systems designed to reduce the entry of radon and other gases from the ground are not covered by this Technical Report. References The following referenced documents are indispensable for the application of this Technical Report. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 779, Particulate air filters for general ventilation — Determination of the filtration performance EN 1507, Ventilation for buildings — Sheet metal air ducts with rectangular section — Requirements for strength and leakage ENV 12097, Ventilation for buildings — Ductwork — Requirements for ductwork components to facilitate maintenance of ductwork systems EN 12236, Ventilation for buildings — Ductwork hangers and supports

Contents:

  • Foreword
  • Scope
  • Annex A (informative) Residential pollutant production rates
  • Annex B (informative) The relationship between humidity and temperature and use of the
  • Annex C (informative) Method of calculating water vapour absorption effect
  • Annex D (informative) Residential ventilation systems and their interaction with the dwelling
  • Annex E (informative) Calculation methods for ventilation requirements
  • Annex F (informative) Examples of assumptions and resulting calculated values for ventilation air
  • Annex G (informative) Noise
  • Annex H (informative) Nomograph for calculating air flow rate to reduce the risk of surface
  • Bibliography

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PD CEN/TR 14788-2006 PDF

BS PD CEN/TR 14788-2006 PDF

$204.47 $408.94