Railway applications. Track. Survey of track geometry quality
Scope: CEN/TC 256/SC 1/WG 28 "Railway applications/Infrastructure/Track geometry quality" conducted a survey of the geometric quality of track across European railway networks. This was to get an understanding and overview of the track geometry across Europe in order to support the definition of track geometric quality classes for the writing of EN 13848-6. This Technical Report describes the methodology used for the survey and gives the results. Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 track quality index TQI value that characterises track geometry quality of a track section based on parameters and measuring methods compliant with the EN 13848 series 2.2 track quality class TQC characterisation of track geometry quality as a function of speed and expressed as a range of TQIs 2.3 re-colouring algorithm which converts one signal into a different signal and which is used in the EN 13848 series to convert a chord measurement signal into a D1 or D2 measurement signal Symbols and abbreviations For the purposes of this document, the following symbols and abbreviations apply. Table 1 — Symbols and abbreviations Symbol Designation Unit AL Alignment mm D1 Wavelength range 3 m < λ ≤ 25 m m D2 Wavelength range 25 m < λ ≤ 70 m m λ Wavelength m Longitudinal level mm QN1 50 % quality level according to EN 14363:2005 mm QN2 90 % quality level according to EN 14363:2005 mm SD Standard deviation mm TQI Track Quality Index – ETQS European track quality survey – TQC Track Quality Class – Speed km/h NOTE In this Technical Report, "AL" stands for “alignment” and is not to be confused with AL standing for “alert limit” as defined in EN 13848-5. PD CEN/TR 16513:2014
Contents:
Foreword
Scope
Annex A (informative) Tables for cumulative frequency distributions for average track quality of all