BS PD CEN/TR 16884-2016 PDF

BS PD CEN/TR 16884-2016 PDF

Automotive fuels. Diesel fuel. Cold operability testing and fuel performance correlation

$220.98 $441.96 -50%
Publisher
isbn 9780580836480
Product Code: BS PD CEN/TR 16884
Stock In Stock
Published: 03/31/2016
Number of Pages: 104
File Size: 1 file, 16 MB

Available Options

Product Description

Automotive fuels. Diesel fuel. Cold operability testing and fuel performance correlation

Scope: This Technical Report lays down the results of a study on the field correlation of the different cold operability (cold flow and cloud point) test results in relation to actual fuel performance in engines in real world cold conditions (below the fuel's cloud point). For this work historical data on both manual and automatic tests and on old (1988), current and future engine concepts have been used. Real market distillate fuels and Fatty Acid Methyl Esters (FAME), plus common blends thereof, have been investigated. Cold flow additives 2.1 Application 2.1.1 Diesel fuel characteristics Middle distillate fuels are primarily complex mixtures of hydrocarbon molecules. Depending on the source of the petroleum crude and on the level of refinery processing, some 15 % to 30 % of these are n-alkanes (also referred to as n-paraffins). The carbon number chain length of these alkanes is typically in the region of C8 to C28/C32. As middle distillates are cooled, the heavier n-alkanes start to precipitate from the fuel. These are in the form of wax crystals which can be as large as 1mm2 and are typically in the form of flat, thin rhomboid plates. As the cooling continues, the wax crystals grow very quickly with n-alkanes as low as C18 involved in the precipitation (Figure 1). Figure 1 — Wax crystals in untreated diesel fuel (source: Infineum) The plate-like crystals also exhibit strong edge-edge attractive forces between individual crystals which results in the formation of a gel structure where the majority of the fuel remaining in the liquid phase is trapped in the interlocking crystal lattice. As a consequence of this, a very small amount of precipitated wax may be sufficient to cause solidification of the fuel. Without the use of external heaters or cold flow additives, this phenomenon rapidly causes the fuel filters found within car and heating fuel systems to block resulting in fuel starvation to the engine, loss of power and eventually engine stalling. In recent years diesel

Contents:

  • Introduction
  • Scope
  • Introduction

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PD CEN/TR 16884-2016 PDF

BS PD CEN/TR 16884-2016 PDF

$220.98 $441.96