Scope: This Technical Report applies to HVDC Systems having more than two converter stations connected to a common DC network, also referred to as HVDC Grid Systems. Serving the near term applications, this report describes radial HVDC network structures as well as pure VSC based solutions. Both grounded and ungrounded DC circuits are considered. Based on typical requirements applied to state of the art HVDC converter stations today this report addresses aspects that are specifically related to the design and operation of converter stations and DC circuits in HVDC Grid Systems. The requirements from the AC systems as known today are included. Secondary effects associated with changing the AC systems, e.g. the replacement of rotating machines by power electronic devices, are not within the scope of the present report. The report summarizes applications and concepts of HVDC Grid Systems with the purpose of preparing the ground for standardization of such systems. The interface requirements and functional specifications given in this document are intended to support the specification and purchase of multi-vendor multiterminal HVDC Grid Systems. 2 Terminology and abbreviations 2.1 General In the work undertaken here it has been identified that a common list of terminology and abbreviations used specifically to describe HVDC Grids should be established. The International Electrotechnical Commission (IEC) standard EN 60633 [1] describes General Terminology for HVDC Transmission and is the reference for common terms and abbreviations. Furthermore EN 62501 [2] describes electrical testing of VSC. A new proposed work item in IEC is to develop terminology for VSC HVDC systems. In addition CIGRÉ has published a brochure 269 on basic operational principles of VSC-HVDC [3]. Specific terms required for components and methods for multiterminal HVDC Transmission, e.g. HVDC breakers and control modes, are described here. The Study Group has established information exchange established with