BS PD IEC/TS 62647-3-2014 PDF

BS PD IEC/TS 62647-3-2014 PDF

Process management for avionics. Aerospace and defence electronic systems containing lead-free solder-Performance testing for systems containing lead-free solder and finishes

$194.31 $388.62 -50%
Publisher
isbn 9780580837074
Product Code: BS PD IEC/TS 62647-3
Stock In Stock
Published: 03/31/2014
Number of Pages: 46
File Size: 1 file, 1.5 MB

Available Options

Product Description

Process management for avionics. Aerospace and defence electronic systems containing lead-free solder-Performance testing for systems containing lead-free solder and finishes

Scope: This part of the IEC 62647 series defines for circuit card assemblies (CCA): – a default method for those companies that require a pre-defined approach, and – a protocol for those companies that wish to develop their own test methods. The intent of this document is not to prescribe a certain method, but to aid avionics/defence suppliers in satisfying the reliability and/or performance requirements of IEC/TS 62647-1 as well as support the expectations in IEC/TS 62647-21. The default method (see Clause 5) is intended for use by electronic equipment manufacturers, repair facilities, or programs that, for a variety of reasons, may be unable to develop methods specific to their own products and applications. It should be used when little or no other information is available to define, conduct, and interpret results from reliability, qualification, or other tests for electronic equipment containing lead-free (Pb-free) solder. The default method is intended to be conservative, i.e., it is biased toward minimizing the risk to users of ADHP electronic equipment. The protocol (see Clause 6) is intended for use by manufacturers or repair facilities that have the necessary resources to design and conduct reliability, qualification, or process development tests that are specific to their products, their operating conditions, and their applications. Users of the protocol will have the necessary knowledge, experience, and data to customize their own methods for designing, conducting, and interpreting results from the data. Key to developing a protocol is a firm understanding of all material properties for the lead-free (Pb-free) material in question as well as knowledge of package- and board-level attributes as described in 5.3.2. As an example, research has shown that the mechanisms for creep can be different between tin-lead and tin-silver-copper (SAC) solders. Understanding these mechanisms is key to determining critical test parameters such as dwell time for thermal cycling. T

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PD IEC/TS 62647-3-2014 PDF

BS PD IEC/TS 62647-3-2014 PDF

$194.31 $388.62