Scope: This Technical Report gives guidance on the principles and methods of testing ID cards to simulate accidental exposure to conditions encountered during the washing and drying of clothing. The physical properties of a card may degrade after exposure and the test methods described may be useful for comparing different card materials or types. Although there are many variations in the design and operation of washing machines, the operation of washing, rinsing, and water removal is common to all types of machine. For simplicity, one washing and drying cycle is specified, which is thought to be typical, according to industry sources. Additional wash cycles and/or different temperature conditions can be used for comparative purposes if desired. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 ballast quantity of textile material (cotton towels or denim jeans) used to fill the space left in the automatic washing machine after the test material has been added 2.2 water softener chemical solution based on polycarboxylates for the purpose of binding calcium ions, preventing hard water scale from forming, and allowing detergents to act as if the water were ‘soft’ 3 Apparatus and reagents 3.1 Washing machine An automatic domestic washing machine. This may be a front loading, horizontal drum type, or a top- loading, agitator type. NOTE Reference [2] describes the characteristics of some machines specifically used for the testing of textiles. These characteristics may be useful for guidance in selecting a machine for test purposes. 3.2 Detergents A commercial, non-biological detergent in common use in the test location or a reference detergent in the test location may be used. Examples of reference detergent are as follows. — ATCC 1993 reference detergent WOB (without optical brightener) as defined in Reference [8]. This is obtainable from the American Association of Textile Chemists and Colorists. This detergent can only b