BS PD ISO/TR 10295-3-2012 PDF

BS PD ISO/TR 10295-3-2012 PDF

Fire tests for building elements and components. Fire testing of service installations-Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials

$147.32 $294.64 -50%
Publisher
isbn 9780580827754
Product Code: BS PD ISO/TR 10295-3
Stock In Stock
Published: 04/30/2013
Number of Pages: 28
File Size: 1 file, 1.8 MB

Available Options

Product Description

Fire tests for building elements and components. Fire testing of service installations-Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials

Scope: This part of ISO 10295 provides guidance in respect of a structured method of characterizing the penetrating seal under test utilizing a series of defined parameters, each one being determined by the use of a selected series of test configurations in conjunction with simulated services. The level of characterization being sought is dependent upon the classification requirement of the system, which in turn determines the complexity of the test program. It is also intended the test method addresses the influence the supporting construction has on the performance of the seal system. The methods described apply to the determination of data relating to single component penetration seals where the penetration service does not melt out within the appropriate period of exposure to a fully developed fire. The selection of the appropriate system depends upon many factors. Of particular importance is the size of the penetration, since penetration seal systems are frequently penetration size (or size range) specific. This is a guidance document, its purpose being to determine the critical parameters relating to the performance of the seal being evaluated. Such parameters can then be used as a basis for interpolation and/or extrapolation of the seal’s performance. The procedures used have been developed utilizing small square penetrations, single component penetration seals, and cylindrical conductors; however it is possible to generate a similar series of tests using rectangular cross-section conductors if this is more appropriate to end use. This part of ISO 10295 provides a structured approach designed to establish — the mode of failure; — the parameters critical to the performance of the penetration seal under test. The mode of failure and critical parameters are ascertained using test configurations appropriate to the potential performance of the product, in conjunction with clearly defined standard penetrations. The results gained from the application of this technical rep

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PD ISO/TR 10295-3-2012 PDF

BS PD ISO/TR 10295-3-2012 PDF

$147.32 $294.64