BS PD ISO/TR 18486-2016 PDF

BS PD ISO/TR 18486-2016 PDF

Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

$71.12 $142.24 -50%
Publisher
isbn 9780580824623
Product Code: BS PD ISO/TR 18486
Stock In Stock
Published: 02/29/2016
Number of Pages: 16
File Size: 1 file, 1.1 MB

Available Options

Product Description

Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Scope: This Technical Report specifies a calculation method which allows calculating a parameter which compares the spectral irradiance of a laboratory radiation source for weathering application to a reference solar spectral irradiance. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 spectral irradiance Eλ radiant flux per unit area per wavelength interval Note 1 to entry: It is measured in watts per square metre per nanometre (W ⋅ m–2 ⋅ nm–1). 2.2 action spectrum description of the spectral efficiency of radiation to produce a particular polymer response (specific property change of a specific polymer) plotted as a function of the wavelength of the radiation Note 1 to entry: Data of an action spectrum are specific to the polymer but independent from the radiation source, also named spectral sensitivity. 3 Symbols and abbreviated terms E(λ)ref. spectral irradiance of reference sun (W ⋅ m–2 ⋅ nm–1) E(λ)source spectral irradiance of laboratory radiation source (W ⋅ m–2 ⋅ nm–1) E(λ)scaled scaled spectral irradiance of laboratory radiation source (W ⋅ m–2 ⋅ nm–1) s(λ) action spectrum 4 Significance Not for all applications of simulated solar radiation (laboratory radiation source) the total sun spectrum is needed. For economic reasons, therefore, it is advisable to simulate only that spectral range being of importance for the respective process or in cases of application where the object’s heating has to be observed in close limits, e.g. with biological objects. In this case, both VIS and IR radiation have to be eliminated to a great extent (see Table 1). TECHNICAL REPORT ISO/TR 18486:2016(E) PD ISO/TR 18486:2016

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PD ISO/TR 18486-2016 PDF

BS PD ISO/TR 18486-2016 PDF

$71.12 $142.24